# amCharts 5 Changelog

The format is based on [Keep a Changelog](http://keepachangelog.com/en/1.0.0/).

Please note, that this project, while following numbering syntax, it DOES NOT
adhere to [Semantic Versioning](http://semver.org/spec/v2.0.0.html) rules.

## [5.10.10] - 2024-12-30

### Fixed
- Fixed restoring serialized Heikin Ashi indicator.
- Heikin Ashi indicator formula fix.


## [5.10.9] - 2024-12-20

### Added
- Added way to determine if text label was autotruncated (`label.text._display.trunacted`).
- Heikin Ashi indicator added to `StockChart`.

### Changed
- The following settings will carry over to `Label`'s HTML content if set: `fontFamily`, `fontSize`, `fontStyle`, `fontWeight`, `fontStyle`, `fontVariant`, `textDecoration`.
- When an `MapChart` is zoomed using mouse wheel it will no longer stop page scroll when its fully zoomed out.
- When arranging tooltips on an `XYChart`, will now pay attention to `tooltipContainerBounds.bottom` setting.

### Fixed
- `ZoomableContainer` was not zooming out properly if `minZoomLevel` was `< 1`.
- `PicturePattern` was ignoring `colorOpacity` setting.
- `PicturePattern` with `fit: "pattern"` set would sometimes not show actual image.
- "Measure" drawing tool of `StockChart` was not including one volume bar value.
- If a timezone was set on a chart and browser's locale was set to some non-English language, weekly grid was shown incorrecly on a `DateAxis`.
- Changing `text` on a `Label` with `oversizedBehavior="fit"` would sometimes not revert to original scale even if the new text would fit into max width.


## [5.10.8] - 2024-11-21

### Added
- New setting `lineCap` (default `"butt"`) added to `Graphics`. Allows specifying how line ends should be drawn. Possible values: `"butt"` (default), `"round"`, `"square"`.
- New setting `clickAnnounceText` added to `Sprite`. If set will announce the text when focused element is triggered with a press of ENTER or SPACE.

### Changed
- Pressing Shift-TAB while focus on non-first member of the focusabel group will now jump to a previous group or focusable element, rather than current group's first element.
- When an `XYChart` is zoomed using mouse wheel it will no longer stop page scroll when its fully zoomed out or zoomed in.

### Fixed
- HTML content was ignoring `dx`/`dy` position adjustment settings.
- Pressing the UP key was being ignored when navigating within a group of focusable objects.
- Last label of `GaplessDateAxis` was in wrong position when `baseInterval` was set to week and `minorGrid` was enabled.
- Setting data item's value to `null` (if previous was a valid number) did not remove the column of a `ColumnSeries`.
- The `maxWidth`/`maxHeight` recaculation of vertical labels was not correctly factoring in its padding.


## [5.10.7] - 2024-10-12

### Fixed
- In some cases disposing `Root` element could result in a "Template is disposed" error.


## [5.10.6] - 2024-10-11

### Added
- `hideDrawingGrips` setting (default: `false`) added to `StockChart`. If set to true, grips of drawings will be hidden when not in drawing mode.
- `toggleDrawing(enabled: boolean)` method added to `StockChart`. Toggles drawing mode on or off.
- `autoOpenSettings` setting (default: `true`) added to `Indicator`. If set to `false`, a settings modal will not pop up automatically when the indicator is added to chart via indicator control.

### Changed
- On `StockChart` labels and icons are no longer draggable to avoid interfering with chart drag/zoom.
- Arrow position slightly changed in "Line Arrow" drawing tool on `StockChart`. Grip at the end of the arrow removed.
- Arrow tip size will not increased to reflect the line thickness of a "Line Arrow".
- "Volume Profile" indicator had its full name hardcoded for legend. It will now use its `shortName` (which is "Volume Profile", too, by default but can be changed to anything else).
- `Modal` content will now have its contents aligned to `start`, rather than `left`, to properly handle RTL direction.

### Fixed
- "Line Arrow" drawing tool would not save its color when serialized.
- "Line Arrow" tip was not taking a color change.
- ES2025 examples involving `MapChart` were not correctly importing geodata.
- Using `clearDrawings()` was erroring if there was "Line Arrow" drawings added to `StockChart`.
- Rotated elements with HTML content were not being properly positioned in all cases.
- `scrollToChild` method of `Container` was not working properly.


## [5.10.5] - 2024-09-06

### Added
- `scrollToChild()` method added to `Container`. Scrolls the container to the target child element if the container is scrollable and the element is currently outside of view.
- New `StockChart` drawing tool added: "Line Arrow".

### Changed
- When a selected drawing in a `StockChart` is inselected by clicking on a chart's plot area the new drawing will not be added anymore.

### Fixed
- Keyboard-dragging of focusable elements was not working correctly in some cases.
- Sometimes label/callout drawing text was cut temporarily while editing them on `StockChart`.
- Editable labels/callouts would go into edit mode when unserialized.
- If auto-saving of drawings was enabled, editing text would not always save the latest version of the label/callout text.
- Dragging a `StockChart` drawing while other drawing was selected, would drag the selected drawing as well.


## [5.10.4] - 2024-08-30

### Changed
- Multiple clicks (or ENTER presses when focused) on an `showTooltipOn: "click"` elements will toggle tooltip, rather than keep it open.

### Fixed
- Accessibility: A focusable element would display tooltip only once on ENTER press with NVDA reader.
- `"Horizontal Line"` and `"Horizontal Ray"` lines are now allow for longer overzoom / X-axis scope.
- Candles on a `GaplessDateAxis` could some time become too wide.


## [5.10.3] - 2024-08-23

### Fixed
- The chart would not allow overzooming using mouse wheel since `5.10.2`. It will now allow overzoom based on axis' `maxDeviation` setting.


## [5.10.2] - 2024-08-23

### Added
- `panSensitivity` added to `AxisRenderer` (default: `1`).
- `maxPanOut` added to `ZoomableContainer` (default: `0.4`).
- Method `addLine(tool, panel, point)` added `DrawingControl`. Allows adding line drawings via API. Supports (`"Horizontal Line"`, `"Horizontal Ray"`, `"Vertical Line"` tools). [More info](https://www.amcharts.com/docs/v5/charts/stock/toolbar/drawing-control/#Adding_line_drawings).

### Fixed
- Fast mouse wheel zooming of stock chart could cause browser to hang in some cases.
- `minBulletDistance` of a `XYSeries` was ignored when base axis was `CategoryAxis` and other axis was `DateAxis`.
- RTL labels with text-wrapping enabled were not being positioned properly.


## [5.10.1] - 2024-08-09

### Added
- `fillGradient` setting added to `Label`.

### Changed
- Exporting a PDF will now check image size and will not scale it up to fit page size if it's smaller. It will still scale dowwn the image to fit in the page.

### Fixed
- Memory leak with axis ranges on `LineSeries` fixed.
- `PieSeries` tick was not visible if pie had two equal slices.
- `root.nonce` was not being added to all dynamically-loaded stylesheets.
- A stack overflow could occur when auto-zooming a `ValueAxis` in some very rare cases.


## [5.10.0] - 2024-07-22

### Added
- A second parameter (`dataContext`) added to `Component`'s methods `pushDataItem` and `makeDataItem`, allowing to pass in a data context object related to the data item.
- New class `PatternSet` added. Allows serving patterns similarly to `ColorSet`. [More info](https://www.amcharts.com/docs/v5/concepts/colors-gradients-and-patterns/patterns/#Pattern_sets).
- New setting `patterns` added to `Hierarchy`, `PercentSeries`, `Venn`, `SerialChart`, `FlowNodes`. [More info](https://www.amcharts.com/docs/v5/concepts/colors-gradients-and-patterns/patterns/#Pattern_sets).
- New setting `fillPattern` added to `IFlowNodesDataItem`, `IHierarchyDataItem`, `IPercentSeriesDataItem`, `IVennDataItem`, `ISeriesSettings`.

### Fixed
- `LinkedHierarchy` nodes were not clickable when children were added using `addChildData()` method.
- If there were no nodes at `topLevel` in `Hierarchy` chart, it would show nodes from upper levels.
- Not all event listeners were disposed when disposing a `ChartIndicator`. This could cause a memory leak.
- `Sprite`'s `hover()`/`unhover()` methods now check if the `Sprite` is not disposed. This fixes some potential errors when disposed items are being referenced.
- Adding in explicit d3 dependencies ([Issue 1567](https://github.com/amcharts/amcharts5/issues/1567))
- `DurationFormatter` was not rounding fractional numbers properly in some cases.


## [5.9.13] - 2024-07-03

### Fixed
- If start and end values of a `HeatLegend` were the same, the tooltip was shown in the top/left corner of the chart.
- If a linked hierarchy had bullets on links, they remained visible when nodes and links were hidden.
- Zoom-out button could be visible initially with some specific setups.
- `ZoomableContainer` would not react to pans in some of its sections if its contents was panned outside the its bounds.


## [5.9.12] - 2024-06-12

### Changed
- `ClusteredPointSeries` now re-clusters points only when zoom level changes. This improves performance when paning/rotating the map.

### Fixed
- `NumberFormatter` would incorrectly round numbers smaller than 0 due to floating point issue in some cases.
- An error could occur when enabling drawing mode if there were previously disposed chart indicators.
- Truncated or wrapped labels were not properly sizing underline and line-trhough decorations.
- While wheel-zooming bothg X and Y axes simultaneously, the chart could fully zoom out in some cases.


## [5.9.11] - 2024-05-30

### Added
- `clusterDelay` setting added to `ClusteredPointSeries`. Setting it to non-zero number will automatically debounce re-clustering of points, helping with performance when there are a lot of data items.

### Changed
- `ZoomControl` buttons will now be automatically disabled whem max or min zoom level is reached.

### Fixed
- "Zoom out" button was visible even the chart was not zoomed when `selectionStrictMinMax` was set to `true` (you still need to set `strictMinMax: true` for it to go away).
- `Venn` chart could produce JS error when slices were being hidden in rapid succession.
- Charts added to clustered point series bullets were not being rendered.


## [5.9.10] - 2024-05-23

### Fixed
- Serializing/saving ATR indicator was generating an error.
- Toggling a focused element with ENTER/SPACE will no longer trigger its hover.
- Reverting the empty canvas fix from `5.9.9` as Chrome seems to have fixed the issue.


## [5.9.9] - 2024-05-21

### Added
- "Average True Range" indicator added to `StockChart`.

### Fixed
- Some recent versions of Chrome would sometimes clear canvas of a chart in an inactive tab after some time.
- Some events were not being disposed together with related object.
- Disposing an `XYChart` immediately after it was created would not dispose its `XYCursor` and related event handlers.
- `StockChart` method `unselectDrawings()` was not hiding resizer brackets.
- `SliceGrouper` would not update properly when series data was updated.


## [5.9.8] - 2024-05-10

### Added
- Two new settings for `Sprite` added: `ariaCurrent` (sets [`aria-current`](https://w3c.github.io/aria/#aria-current)) and `ariaSelected` (sets [`aria-selected`](https://w3c.github.io/aria/#aria-selected)).
- Two new methods for `MapPolygonSeries` added: `getPolygonByPoint()` and `getPolygonByGeoPoint()`.

### Fixed
- Better positioning of `EditableLabel` when its `width` is set.
- `alwaysShow` setting of `XYCursor` was not working properly.


## [5.9.7] - 2024-05-07

### Fixed
- `ValueAxis` could go into infinite loop under the following conditions: `max` was set to a value which was smaller than a calculated minimum of the axis when `strictMinMax` set to `true`.


## [5.9.6] - 2024-05-07

### Added
- New `EditableLable` setting: `multiline` (default: `true`). If set to `false` will only allow label to be edited on a single line.
- `hsvToHsl()` and `hslToHsv()` color convertion functions added to `am5.utils` namespace.

### Changed
- Accessibility: Both vertical and horizontal line elements of `XYCursor` now have their `role` set to `"slider"` by default.
- `EditableLabel` now supports `maxWidth` and `oversizedBehavior` settings.
- `EditableLabel` will now reset all available styles that might come from page-wide CSS to `"initial"` so its appearance is not affected by any outside CSS.

### Fixed
- `EditableLabel` was not being properly positioned with `textAlign` set to anything else than `"left"`.
- `ValueAxis` in some rare cases (when `max` and `maxPrecision` was set) could get to infinite loop.
- Some drawing series on `StockChart` were not properly removing items of deleted drawings from their data/dataitems.


## [5.9.5] - 2024-05-02

### Added
- New `DrawingControl` setting: `scrollable` (default: `false`). If set to `true` will restrict tool list to the height of the target chart.
- New `Sprite` method: `compositeRotation()`. Returns element's rotation in degrees, taking into account all of its ancestors.
- New element `EditableLabel`.

### Changed
- The drawing tool dropdown will now be fixed to the height of the target chart by default. You can disable it using `scrollable: false` on the `DrawingControl`.
- HTML content will now take `rotation` setting into account.
- Label and Callout drawing tools in `StockChart` will now use new `EditableLabel` element for smoother editing experience. The text is now editable.

### Fixed
- A `ValueAxis` with logarightmic scale and very small numbers was sometimes displaying cluttered grid lines and overlapping labels.
- Volume Profile indicator could show previous data if user quickly scrolled to the range where no volume data was available.
- Switching type of `RadialLabels` from radial to circular was resulting in those labels positioned incorrectly.
- If a mouse pointer was over the chart when TAB key was used to focus an `XYCursor` line, series/axis' tooltip would disappear.


## [5.9.4] - 2024-04-26

### Fixed
- `StockChart` with `VolumeProfile` indicator was snapping scrollbar's left grip to the start.
- Logarithmic axis was not showing labels less than 10e-5.
- `Treemap`'s labels would sometimes not adjust its size (usually with a lot of data).


## [5.9.3] - 2024-04-23

### Added
- Added possibility to add bullets to links in a linked hierarchy charts, like Force-directed and Tree. [More info](https://www.amcharts.com/docs/v5/charts/hierarchy/hierarchy-link-bullets/).
- New `IndicatorControl` method: `clearIndicators()`. Allows clearing all indicators from the chart at once.

### Changed
- `StockChart` will now automatically disable select mode when exitting drawing mode.
- `XYChart` background fill color and opacity have been moved to a default theme, so that it can be overridden by custom themes.

### Fixed
- Resize bubbles on `StockChart`'s drawings were sometimes disabled when switching and drawing with another drawing tool.
- Resize bubbles on `StockChart`'s were not shown after Eraser was turned on and off.
- Resize bubbles on `StockChart`'s were not shown when drawing mode was toggled off and then back on.
- `PieChart` was not updating radius if resized very quickly.
- If an `XYSeries` was initially hidden, its tooltip was still visible on an `XYChart` with cursor.
- Clicking on a selected icon drawing in a `SockChart` would not unselect it.
- A perfectly vertical or horizontal line with `strokeGradient` set was invisible.
- Removing an indicator from `StockChart` could cause Y-axis to be auto-zoomed incorrectly.
- The centering of a scaled HTML content was not taking `centerX`/`centerY` into account.


## [5.9.2] - 2024-04-17

### Added
- Accessibility: Two new `Tooltip` settings added: `readerAnnounce` (boolean, default: `false`) and `labelAriaLabel`. If `readerAnnounce` is set to `true`, tooltip's contents (`labelAriaLabel` if set, or regular label text) will be read out by screen readers when tooltip is shown or its data item changes.
- Accessibility: New `Label` method: `getAccessibleText()`. Returns populated `arialLabel` text if set, or regular `text` content.
- New `Sprite` method: `compositeScale()`. Returns actual scale of an element, compounded based on scale of its own and all of its ancestors.
- Net global function `am5.getRootById(id)`. Returns `Root` instance stored in a `<div>` with specific id.
- 4 new `StockPanel` events added: `moved`, `closed`, `collapsed`, and `expanded`. [More details](https://www.amcharts.com/docs/v5/charts/stock/panels/#Events).
- 2 new `Entity` methods added: `off(key, callback?)` and `offPrivate(key, callback?)`. Allows removing setting/private setting value change events set via `on()`/`onPrivate()`. [More details](https://www.amcharts.com/docs/v5/concepts/events/#Removing).
- New `StockChart` setting: `erasingEnabled`. If set to `true`, the chart will go into "eraser" mode - same as clicking on an Eraser tool in stock toolbar.

### Changed
- HTML content will now scale according to its "composite" `scale`. (Scale calculated all the way its ancestor tree).
- `StockChart` will now restore "selection mode" after briefly turning it off while drawing is being drawn.
- Improved dangling of circular labels with Arabic text.

### Fixed
- HTML content was sometimes being incorrectly positioned if either `width` or `height` was set, but not both.
- Selecting a drawing on a `StockChart` was resulting in an error if there was no `DrawingControl` present in a chart's toolbar.
- `StockChart`'s eraser tool was not working properly since `5.9.1`.
- If a `StockPanel` was added to a zoomed `StockChart` it would not sync its zoom and would appear fully zoomed out.


## [5.9.1] - 2024-04-10

## Added
- New control in `StockChart`'s drawing toolbar: "Select". Allows toggling "selection" mode on and off. When it's on, clicking on any existing drawing will select it. Otherwise drawing will be initiated using currently selected tool. This allows drawing over existing drawings. Default: off.
- New `StockChart` setting: `drawingSelectionEnabled` (default: `false`). If set to `true`, all drawings will be selectable by clicking on them.

### Changed
- Bundled `xlsx` library code updated to `0.20.2`.
- All drawings are not selectable by default (they were selectable since 5.9.0). To enable selection, use the newly introduced "Select" control, or via `StockChart`'s `drawingSelectionEnabled` setting.

###
- Revisited fix to `tabindexOrder` with a safer approach.
- Arrow-navigating between grouped focusable items were not "jumping over" hidden items.
- `LineSeries`' axis ranges were not properly using `stroke`/`fill` templates from data.


## [5.9.0] - 2024-04-09

### Added
- `zoomToDataItems(dataItems, rotate)` method added to `MapPolygonSeries`.
- Bigger hit circle added to Stock charts drawings bullets, which becomes visible when hovered.
- A public method `markDirtyKey()` added. Could be used to trigger an adapter.
- A "Reset to default" link added to `StockChart`'s settings modal.
- New `StockChart`/`DrawingSeries` methods added related to drawing selection: `selectDrawing(id, keepSelection)`, `unselectDrawing(id)`, `unselectDrawings()`.
- New `StockChart`/`DrawingSeries` methods added related to drawing deletion: `deleteDrawing(id)`, `deleteSelectedDrawings()`.
- New `StockChart` events: `drawingadded`, `drawingremoved`, `drawingselected`, `drawingunselected`.
- New `DropdownListControl` methods: `getItemById(id)` and `setItemById(id)`.
- New `IconControl` methods: `getIconByPath(path)` and `setIconByPath(path)`.
- New drawing tools added to `StockChart`: "Triangle" and "Polyfill".

### Changed
- Improved handling of moving lines of an `XYCursor`. It will now move by one cell automatically, or by 5 cells if pressed together with `CTRL`.
- Improved styling of a color picker control in `StockChart`'s toolbar and settings modals.
- Drawing functionality was completely revamped: all drawings are now selectable, editable, movable, and can be deleted by selecting them and pressing `DEL`.
- Accessibility: Pressing SPACE when element with `role="checkbox"` set is focused, will now toggle it just like pressing ENTER.
- `pdfmake` updated to `0.2.10`.

### Fixed
- `Sprite` was not marking its bounds dirty when margins changed. It was causing layouts with margins not to be redrawn after margins changed.
- When drawing mode was enabled in a `StockChart` while in the percent scale, it used to reset scale to regular.
- `Tooltip` no longer overwrites user-provided `background`.
- `Treemap` was not redrawing when layout algorithm was changed dynamically.
- `Tooltip` position was not being updated when bounds of a `Sprite` changed.
- Moving line of an `XYCursor` with a keyboard press could result in an axis line to be out of sync with series tooltips.
- `tabindexOrder` was not working properly in some cases.
- Font family and font size controls were showing unnecessary "+" icon.
- In some rare cases setting value on an object / data item was not working.


## [5.8.7] - 2024-03-25

### Fixed
- If a `Label` with background was hidden due to `oversizedBehavior` rule, the background was still visible.
- Moving `XYCursor` with keyboard were not always properly updating adapter-populated tooltips.
- HTML-based tooltips were not being updated properly in some cases.
- Labels of a zero-value slices on a `Venn` diagram will not be displayed anymore.
- `Sankey` links were ignoring `dx` and `dy` settings set on nodes.
- A JS error could occur when loading on-demand data in some specific cases.
- Series range affected by an axis range was not using settings from its `tempalteField`.
- When data grouping was enabled on `DateAxis`, calling `zoomToDates()` (and `zoomToValues()`) could result zooming to slightly different dates.


## [5.8.6] - 2024-03-20

### Fixed
- `pancancelled` event of an `XYChart` was not being fired in some cases.
- When old series were removed from an `XYChart` and a new added, related `ValueAxis` was not zooming out to new data if Animated theme was not used.
- `Series.on("tooltipDataItem")` was not working in some setups since `5.8.3`.
- If a `ValueAxis` width `extraMin` and/or `extraMax` set was being synced with another axis (via `syncWith`) chart could go into an SO in some setups/cases.


## [5.8.5] - 2024-03-15

### Added
- `forceHidden` (default: `false`) setting added to `StockControl`. Enables forcing some `StockChart` controls to be always hidden.
- New `DateRangeSelector` event added: `"rangeselected"`.
- New `PriodSelector` event added: `"periodselected"`.

### Fixed
- A JavaScript error was being triggered if a `Picture` was disposed before external image was finished loading (since 5.8.3).
- Inputs in `DateRangeSelector` were ignoring `Root`'s `timezone` and `utc` settings.
- Thicker stroke (`strokeWidth > 1`) was being ignored as a hit target for interactive elements.
- `Scrollbar` grips would not update their position according to `maxZoomCount`/`minZoomCount` setting in some cases.
- Hovering over the border of a `Treemap` node could result tooltip of some other node to appear.
- In some cases pointer over tooltip of a hovered `Treemap` node would remain on the same node, even if pointer would move to some other node.
- If a `{ timeUnit: "week", count: 2 }` (count > 1) was added to a `DateAxis`, labels were flickering while scrolling.
- Calling `zoomToDates()`/`zoomToValues()` on a `DateAxis` was resulting not exact dates when data grouping was enabled and grouping period would changed during zoom.


## [5.8.4] - 2024-02-22

### Added
- New `DrawingSeries` method: `getIndex(drawingId)`. Will return index of a drawing corresponding to a unique id, or `null` if not found.

### Changed
- `PeriodSelector` will now zoom to last/first data items if `stockSeries` is set on `StockChart`. Previously it used to zoom to X-axis scale end/start, regardless of data.
- All `DrawingSeries` will now add a unique `drawingId` to all drawing data.
- Stock indicatos adjusted so that they could handle data with negative values, `0` volume values and all OHLC values being equal.

### Fixed
- Scale of a `ValueAxis` was not adjusting properly if its height/width changed during zoom.
- Standalone `DrawingControl` (one that was not added to a toolbar) was erroring out when parent `Root` was disposed.
- HTML content in a `Label` (with `html` set) was not inheriting labels actual color (`fill`).
- Setting a `selectedDataItem` to a data item without children on a `Hierarchy` series was resulting in error.
- Heat rules were setting "neutral" color on the default state of a target even if it was undefined, resulting in some issues when value was not set.
- Heat rules were ignoring `customFunction` if value was not set.


## [5.8.3] - 2024-02-19

### Fixed
- `Picture`'s events "loaded" and "loaderror" were kicking in before actual picture was fully loaded/errored.
- `ClusteredPointSeries` of a `MapChart` were updating clustered bullets with delay and sometimes they remained in a wrong position.
- `StockChart`'s cursor used to freeze after chart was panned and it was not snapped to Y value (if snapping was enabled) (since `5.8.1`).

## [5.8.2] - 2024-02-16

### Fixed
- `DateRangeSelector` was sometimes selecting an extra day on `GapplessDateAxis`.
- DSome leftover console debug messages removed.


## [5.8.1] - 2024-02-14

### Changed
- `VolumeProfile` indicator will now not let select an unreasonably small value for its "ticks per row" setting.

### Fixed
- Using `DrawingControl` in standalone mode was resulting in error when trying to enable drawing tool from API.
- Volume profile indicator was taking one extra date which was out of selection in some cases.
- If `snapToSeries` was set on `XYCursor`, `tooltipDataItem` was set one extra time with incorrect value on `XYSeries`.
- `XYSeries` was not updating legend if `legendRangeValueText` text was set on series and range was changed from outside without animated theme enabled.


## [5.8.0] - 2024-02-01

### Added
- New container type `ZoomableContainer` added, which allows adding zoom capabilities to virtually any chart. [More info](https://www.amcharts.com/docs/v5/concepts/common-elements/containers/#Zoomable_container).
- New class `ZoomTools` added. Can be used to quickly add zoom support for elements compatible with `IZoomable` interface, e.g. `ZoomableContainer`.
- New read-only property of `DrawingControl`: `drawingSeries`. Contains an object where key is a drawing tool name and values are array with references to actual drawing series.

### Changed
- Default value for `strokeOpacity` for the grid line of a `StockChart` changed from `0` to `0.4` so that it would differ from regular grid lines.

### Fixed
- Resizing stock chart's panels after moving them up/down was not working properly.
- `Hierarchy.addChildData` was duplicating node's children which were added before.
- If `topDepth` was set to `1` on `Partition`, initially the chart was showing not all levels of nodes.
- When clicking on particular partitions of a `Partion` chart, zoom animation was not playing.
- `DateRangeSelector` was showing extra day in automatically-calculated end date.
- `DateRangeSelector` was zooming to the start of the selected day, instead of end.
- Tooltip background color passed to `HeatLegend.showValue(value, text, color)` was being ignored.
- `ClusteredPointSeries` was not showing charts if they were added to clustered bullets.
- Fixed issue with `DrawingControl` which was unnecessarily duplicating drawing series with each tool selection / API call.
- Using "1M" button in `PeriodSelector` was not always selecting full month.
- Restoring drawings with `DrawingControl.unserializeDrawings()` will now correctly update indexes of the restored drawings based on current drawing counter.
- In some cases `StockChart` was taking a data item which was just outside of zoom range when calculating aggregate values for its series, affecting percent change values and some other aggregates.
- Legend value was not being updated when series axis' range changed. This caused `legendRangeLabelText` to not being updated (if set) when chart was being zoomed-in/out.
- If a type of `StockChart` series was changed with data grouping enabled, some duplicate candlesticks or ohlc sticks were displayed until first zoom.
- In some rare cases chart would show incorrect last segment of a `LineSeries` when in percent mode.


## [5.7.7] - 2024-01-18

### Added
- New setting in `StockToolbar`: `focusable` (default: `false`). If set to `true`, will make all toolbar controls navigable/editable using keyboard. [More info](https://www.amcharts.com/docs/v5/charts/stock/toolbar/#Accessibility).

### Changed
- `ariaChecked` setting will be ignored if the element also has `role` set to one of these: `"checkbox"`, `"option"`, `"radio"`, `"menuitemcheckbox"`, `"menuitemradio"`, `"treeitem"`.

### Fixed
- Paused animations no longer trigger a re-render.
- Mouse wheel events now work properly inside of shadow DOM.
- `minBulletDistance` was not being re-measured when size of a chart was changed.
- Volume Profile was ignoring color change in its settings dialog.
- Volume Profile when added on chart load was not properly setting count setting in modal when switching to "Ticks per row".


## [5.7.6] - 2024-01-05

### Fixed
- One of the underlying series was not being removed when disposing MACross indicator.
- Some of the newer indicators were not being restored.
- `autoSave: true` set on `DataSaveControl` was not working.


## [5.7.5] - 2024-01-04

### Added
- New `Annotator` setting: `markerStyleSettings`. Allows setting default settings for UI styles of `MarkerArea`. [More info](https://www.amcharts.com/docs/v5/concepts/exporting/annotator/#Configuring_UI).
- "Moving Average Cross" (MACross) and "Price Volume Trend" (PVT) indicators added to `StockChart`.
- `ZoomControl` now has a new property: `homeButton`. It holds an instance of a button which zooms out the map to its initial position. It is hidden by default, so if needed, needs to unhide it by setting `zoomControl.homeButton.set("visible", true)`.

### Changed
- Settings dialog for a "Volume Profile" indicator will automatically update count field value to a more suitable one when switching count type.

### Fixed
- Clearing data on a `ClusteredPointSeries` would not remove its bullets representing clusters.


## [5.7.4] - 2024-01-02

### Added
- New `Annotator` setting: `markerSettings`. Allows setting default settings for `MarkerArea`. [More info](https://www.amcharts.com/docs/v5/concepts/exporting/annotator/#Configuring_UI).

### Changed
- Heat rules are now set on the default state of a target, too.

### Fixed
- Changing data granularity on `StockChart` was not updating `baseInterval` on indicator's `DateAxis` resulting in indicator showing a wrong chart.
- If `exclude`/`include` was set on a `MapSeries` without GeoJSON set, setting it later later would result in a map not appearing.


## [5.7.3] - 2023-12-26

### Fixed
- `Scrollbar` background was being drawn shifted since `5.7.2`.


## [5.7.2] - 2023-12-22

### Added
- New setting on `Label`: `maxChars`. If set to a number, will truncate text to X characters with ellipsis, obeying `breakWords` and `ellipsis` settings.
- "Bull Bear Power" indicator added to `StockChart`.
- "Acceleration Bands" indicator added to `StockChart`.
- Standalone `registerClass(name, classRef)` added to Stock Chart package (global: `am5stock.registerClass()`). Allows registering own indicator class so that it gets properly serialized and restored.

### Changed
- Improved min/max calculation of the `ValueAxis` when all the values of a series are the same.

### Fixed
- "Volume Profile" was showing up in the `IndicatorControl`'s dropdown, even if `volumeSeries` was not set on the `StockChart`.
- Left-side `ValueAxis` on a `StockChart` (`opposite: false`) it was impossible to right-align axis labels to plot area. Scrollbar's width was also not adjusted to the width of the plot area.
- Some drawing tools in `StockChart` where not working when chart was in comparison mode.
- Drawings created when `StockChart` was in comparinson mode were not carried over correctly when switching to regular value mode.
- Some drawing tools ceized working when main `StockChart` series was updated.
- Searchable dropdown controls in `StockChart` were not clearing up the list of found items when the search field was cleared.


## [5.7.1] - 2023-12-18

### Fixed
- `DataSaveControl` was always clearing manually-saved drawings/indicators unless auto-save was enabled.
- Drawing tools eraser and clear would not always clear drawings loeaded by a `DataSaveControl`.
- `VolumeProfileIndicator` was not working if added via API.
- `VolumeProfileIndicator` was drawn detached from the Y-axis in some cases.
- Fixed `VWAP` indicator with data that contained zero-volume items.


## [5.7.0] - 2023-12-17

### Added
- New `Serializer` setting: `fullSettings`. Will ignore depth settings for keys listed in `fullSettings`.
- New `StockAxis` toolbar control: `DataSaveControl`. Allows to automatically or manually save all drawings and indicators to browser's local storage, as well as restore them across sessions. [More info](https://www.amcharts.com/docs/v5/charts/stock/toolbar/data-save-control/).
- Added additional item in `SettingsControl`: Auto-save drawings and indicators.
- New setting in `SettingsControl`: `autoSave`. Enables user to toggle auto-saving of indicators/drawings via Settings dropdown.
- New setting in `DropdownList` and `DropdownListControl`: `exclude`. Can be set to an array of item IDs that should not appear in the list. Can be used to disable default list items.
- New property in `StockChart`: `spriteResizer`. Holdes an instance of `SpriteResizer` which is used among drawing tools.
- `zoomable` setting added to Axis. If set to false, calling axis.zoom() won't do anything, meaning that the axis won't be zoomed with scrollbars, wheel, cursor etc.

## Changed
- `StockChart` will only sync zoom between X axes that are of the same type as the main axis.
- All drawing tools that allow selecting and resizing them (Label, Callout, Icons) will now use shared instance of `SpriteResizer`.
- `IndictorControl` is now searchable by default (`searchable: true`).

### Fixed
- `PeriodSelector`'s buttons were not being reset when chart was zoomed manually.
- Dropdowns in `StockChart`'s control were not being positioned correctly in all cases on a page with RTL direction enabled.
- Drawings loaded from serialized data were not being deleted with eraser or clear tools.
- Elinated multiple calls to preparing data of `StockChart` indicators.
- On `StockChart`, indicator's panel X-axis was out of sync with the main panel's X-axis if the latter's scale was longer to some other series on the main panel.
- Italic toggle was being ignored in `StockChart` label drawing tools.
- `GaplessDateAxis` was not always including the first date when using `axis.zoomToDates(startDate, endDate)` method.
- When swiching to percent scale `StovkChart's main panel was showing wrong Y-axis numbers until first zoom.


## [5.6.2] - 2023-11-30

### Added
- Middle handles added to Parallel channel drawings so that the drawing could be resized vertically.

### Changed
- Clicking on a last or any other bullet when drawing a polyline on a `StockChart` will terminate current polyline. The next click will start a new polyline.
- `extraMax` and `extraMin` settings now work on `GaplessDateAxis`. This allows adding extra space in front (or back) of your data. We recommend setting `maxDeviation` to `0` if you use `extraMax`.

### Fixed
- In some rare cases (with a specific data count and `groupData` set to `true`) the chart was continously switching from monthly to weekly group interval causing the chart to flicker.
- Tick position was not always correct with `minorGridEnabled` set to `true`.
- On a `DateAxis` when `gridInterval` was set to `week`, it still showed minor grid lines even when `baseInterval` was also `week`.


## [5.6.1] - 2023-11-27

### Changed
- New default rule added to `ResponsiveTheme` that will hide minor axis labels below `XXL` (1000px) breakpoint.
- `IndicatorControl` will not list Indicators that rely on volume if chart's `volumeSeries` is not set.

### Fixed
- Fixed stacking of bullets with varying `centerY`.
- `role` setting for `Root` element was being ignored.
- Setting `name` for a Series would not right away update labels of its related legend item.


## [5.6.0] - 2023-11-26

### Added
- `addBullet(dataItem, bullet)` method added to `Series`. Allows adding a `Bullet` directly to a particular data item instead of adding bullet function to the series. [More info](https://www.amcharts.com/docs/v5/concepts/common-elements/bullets/#Adding_directly_to_data_item).
- `stacked` (available values: `"up"`, `"down"`,  `"auto"`) setting added to `Bullet`. Allows enabling of automatically stacking bullets on an `XYSeries`. [More info](https://www.amcharts.com/docs/v5/concepts/common-elements/bullets/#Stacked_bullets).
- `field` (available values: `"open"`, `"high"`, `"low"`, `"value"`) setting added to `Bullet`. Works with `XYSeries` only. Allows setting a particular data field where the bullet should displayed at. Note: `locationX``locationY` settings will be ignored if `field` is set. [More info](https://www.amcharts.com/docs/v5/concepts/common-elements/bullets/#By_data_field).
- New `Root` element setting: `focusPadding` (default: `2`). Allows specifying distance between focused element and the focus outline.
- Minor grid/labels added on `AxisRenderer` with new settings `minorGridEnabled` and `minorLabelsEnabled` (default: `false`). [More info](https://www.amcharts.com/docs/v5/charts/xy-chart/axes/#Minor_grid).
- New setting `minorDateFormats` added to `DateAxis`. Allows setting different formats for minor grid labels. [More info](https://www.amcharts.com/docs/v5/charts/xy-chart/axes/date-axis/#Minor_grid_formats).

### Changed
- When `DateAxis` is in weekly grid mode, it will now use `multiLocation` for labels instead of `location`.
- Placement of grid/labels is improved on `DateAxis` and `GaplessDateAxis`.

### Fixed
- Truncating was not working properly on circular labels.
- Fixed potential conflict of responsive rules in `ResponsiveTheme`.
- Issues fixed with data items appearing in wrong place on a chart with data grouping enabled and timezone set.
- `DrawingControl.unserializeDrawings()` method was broken since `5.5.7`.


## [5.5.7] - 2023-11-17

### Added
- Two new settings on a `ClusteredPointSeries`: `scatterDistance` and `scatterRadius`. Allow exploding clusters of very close points when further zoom-in is no longer possible. [More info](https://www.amcharts.com/docs/v5/charts/map-chart/clustered-point-series/#Scatter_settings).

### Fixed
- `PieSeries` was not issuing proper colors for its slices with some JSON config setups.
- In `StockChart` when percent mode was being switched off and related series toggled via legend, it would revert to percent mode.
- When updating data on a `PieSeries` its ticks could be displayed going all the way to the center briefly.
- Changing data on a main series in a `StockChart` was not updating related indicators properly.
- Legend marker for a `LineSeries` with bullets could display incorrectly if the whole chart was created before adding it to the `Root` container.


## [5.5.6] - 2023-11-10

### Added
- Each `<canvas>` element in chart will now have its `class` set to reflect its layer/order, so it can be targeted with CSS. E.g. `am5-layer-0`.
- `ClusteredPointSeries` added. Allows automatically clustering closely-located bullets into groups. [More info](https://www.amcharts.com/docs/v5/charts/map-chart/clustered-point-series/).
- `zoomToDataItems()` method added to `MapPointSeries`. Can be used to zoom to a number of series data items so all of them are visible.

### Fixed
- `DataProcessor` was not parsing timestamp-based string dates ('"x"') properly.
- `strokeGradient` set on an `AxisRenderer` was not being applied (since `5.5.5`).


## [5.5.5] - 2023-11-06

### Added
- SMA line added to Relative Strength Index indicator in `StockChart`.
- A possibility to draw a Parallel Channel added to `StockChart`.

### Changed
- Removed dependency on the `regression` npm package.

### Fixed
- Change of `minGridDistance` setting on `AxisRenderer` was not being applied until next redraw.
- Snapping of `StockChart` drawings sometimes worked incorrectly.
- Average line was drawn incorectly on a `StockChart` (since `5.5.2`).


## [5.5.4] - 2023-11-01

### Fixed
- All `StockChart` indicators with OverBought/Oversold ranges were zooming to the selected series range (they should not).


## [5.5.3] - 2023-11-01

### Added
- New indicator "Stochastic Momentum Index" added.
- All `StockChart` indicators with OverBought/Oversold ranges (Commodity Channel Index, Relative Strength Index, Stochastic Momentum Index, Stochastic Oscilator and Williams R) have now middle line between oversold/overbought. Also a draggable grip added to oversold/overbought ranges which allows user to change values by dragging these grips.
- New `StockChart` toolbar control: `DropdownControl`. Can use to add any content to be displayed in a dropdown when clicked. [More info](https://www.amcharts.com/docs/v5/charts/stock/toolbar/dropdown-control/).

### Changed
- Changed defaults on a `StockPanel`: `wheelY: "zoomX"`, `panX: true`, `panY: true`. Previously, those were hardcoded in `ChartIndicator`, which prevented a possibility to change them via a theme.
- Changed defaults on an `AxisRendererY`: `pan:"zoom"`. This adds zoom possibility for all Y axes of a `StockChart` (previously indicator Y axes where not zoomable).
- `IndicatorControl` now extends `DropdownListControl` for consistency.
- `IndicatorControl` has now `scrollable: true` set by default.
- Tweaked number formats for indicator legend items.
- Default ordering of indicators in `IndicatorControl` changed.

### Fixed
- Returning empty string from `labelHTML` adapter on a `Tooltip` in some cases could result to an error.
- Timezone formatting with "z" codes in `DateFormatter` was not always correct.
- `XYChart` could flicker on Safari browser in some rare responsive CSS setups.


## [5.5.2] - 2023-10-27

### Added
- `customValue` added to `ISeriesDataItem` and `customValueField` to `Series`. Allows storing additional numeric information which could be used for heat rules and other purposes.
- A middle line between oversold and overbought added to `StockChart`'s RSI indicator.
- While drawing polygon in a `StockChart`, a line is drawn from the previous point to mouse pointer.
- New setting `scrollable` (default: `false`) added to `StockChart`'s `DropdownList` and `DropdownListControl` (as well as other controls that extend those, e.g. `ComparisonControl`). If set to `true`, will automatically limit dropdown height to fit into chart, and will show scrollbar if the contents do not fit.
- Measure tool added to `StockChart` (as a drawing item).
- `toolSettings` setting added to `DrawingControl`. Allows passing in default settings for each drawing tool. [More info](https://www.amcharts.com/docs/v5/charts/stock/toolbar/drawing-control/#Tool_settings).

### Changed
- Printing via `ExportingMenu` print functionality using "CSS" print method will now temporarily remove all margins and padding on `body` so that images that do not fit into single page do not produce a blank page.
- `StockChart`'s Fibonacci drawing tool now draws from initial click point to the mouse pointer instead of to the right of the plot area.
- `StockChart`'s Fibonacci drawing tool's click point is now at 1 value (was at 0).
- Most of drawing tools of `StockChart` now support snapping to data items.
- Snapping to data items in `StockChart` drawing tools is now turned off by default.

### Fixed
- If an axis range was created for a `ColumnSeries` after series was inited, columns for the range were not being created.
- `GaplessDateAxis` valueToPosition method was returning wrong position if value was less than min value of the axis.
- Unserializing indicators and drawings that create separate panel in a `StockChart` would not restore drawings in indicator's panel.
- Hierarchy node was not taking "disabled" state when singleBranchOnly was true and another node was clicked.
- drawingId was not added to StockChart's PolylineSeries.
- Rapidly clicking on tree map nodes (when many and cpu is jammed) could result js error.
- Circle's and Rectangles strokeWidth was ignored when detecting if the element is hovered.
- If a Picture was disposed before loading finished, it resulted js error.

## [5.5.1] - 2023-10-19

### Fixed
- Not all visual settings from columns were being copied to their legend markers.
- Data items with identical timestamps in data could sometimes be ignored when plotting series.
- `drawingsInteractive(false)` was not having an effect on some drawing tools (Vertical/Horizontal/Ray Line).
- `CategoryAxis`' elements (e.g. labels and grid) were ignoring `forceHidden` setting.
- Some line elements (e.g. grid) were being drawn somewhat blurry since `5.4.9`.


## [5.5.0] - 2023-10-17

### Added
- `zoomTo` (values: `"start"` and `"end"` (default)) added to `PeriodSelector`. If set to `"start"`, period buttons will selectg from the start of the data, not from the end. `"YTD"` will still select to the end. [More info](https://www.amcharts.com/docs/v5/charts/stock/toolbar/period-selector/#Zoom_anchor_point).
- `PeriodSelector` now supports `"custom"` periods. [More info](https://www.amcharts.com/docs/v5/charts/stock/toolbar/period-selector/#Custom_periods).
- New filter settings added to `Sprite`: `blur`, `brightness`, `contrast`, `saturate`, `sepia`, `invert`, `hue`. [More info](https://www.amcharts.com/docs/v5/concepts/colors-gradients-and-patterns/filters/#Built_in_filters). **These filters are not supported by Safari browsers.**
- New `GrainPattern` added. Allows adding grainniness effect to any element. [More info](https://www.amcharts.com/docs/v5/concepts/colors-gradients-and-patterns/patterns/#Grain_patterns).
- New private setting `trustBounds` added to `Sprite`. If set to `true`, the Sprite will check if a mouse pointer is within bounds of a Sprite before dispatching its pointer events. This helps to solve ghost tooltips problem which sometimes appears while moving the pointer over interactive objects. It is set to `true` by default on `Rectangle` and `Circle`.

### Changed
- Previously elements only supported one fill at a time - either `fill` or `fillGradient` or `fillPattern`. Now `fill` or `fillGradient` will be drawn even if `fillPattern` is set. This allows combining
patterns with gradient fills.
- Gradients no longer inherit parent object's `fill`.
- It is now possible to draw annotations on a `StockChart` outside X-axis' min/max using axis overzoom.
- If a `forceHidden` for the tooltip is set to `true` the tooltip size won't be taken into account when arranging tooltips on an `XYChart`.

### Fixed
- An error was being thrown when chart with focused element was being disposed.
- If a series had data items without value and axis was zoomed so that only these data items were in range, the series used its full min and max values resulting value axis to be fully zoomed out.
- Using `hide()`/`show()` methods on an axis data item would no hide its visual elements.
- Drawing annotations on a `StockChart` with timezone set was a bit wonky.


## [5.4.11] - 2023-10-10

### Fixed
- `SliceGrouper` would use first color in series for a "group" slice if series was using a color set with custom list of colors.
- Fixed a problem where no series was displayed after data with all 0 values was set (since `5.4.10`).
- `forceInactive` was not working on `Container`.
- `drawingsInteractive(value: bool)` method in `StockChart` was not working properly.


## [5.4.10] - 2023-10-06

### Fixed
- `StockChart` settings `stockPositiveColor` and `stockNegativeColor` was being ignored in some cases since `5.4.9`.


## [5.4.9] - 2023-10-06

### Added
- `drawingsInteractive(value: bool)` method added to `StockChart`. `false` will make current annotations (drawings) to be fully static (non-editable).

### Fixed
- Zoom out button on `XYChart` was not focusable.
- Pulled out slices of a `PieSeries` could overlap with other slices if some slices were hidden.
- Pinch-zooming was not working properly in `XYChart`.
- Candlesticks on a `StockChart` were being colored based on previous period close value instead of current period open value.


## [5.4.8] - 2023-09-22

### Added
- Momentum indicator added to `StockChart`.

### Fixed
- `"z"` date formatting codes were not respecting the `Root.timezone` setting.
- If a new data was loaded and `groupData` of `DateAxis` was changed from `true` to `false`, the chart was not displaying the newly-loaded data properly.
- Accessibility: togglable elements like legend items were not being toggled by ENTER and SPACE keys with some screen reaaders (JAWS, Narrator) active.
- RST indicator of `StockChart` was always using "close" value even if a different value was selected in the settings.
- In some case chart could freeze when selecting with an `XYCursor` and releasing outside plot area.
- If a new animation of the same setting was created right after previous animation finished (on `Animation`'s `"stopped"` event) the animation would not play.


## [5.4.7] - 2023-09-18

### Added
- `panelResizer` property added to `StockPanel`. Holds an instance of an element used as a grip for resizing a panel.
- `originalEvent` added to all `XYCursor` events.
- `selectcancelled` event added to `XYCursor`.

### Fixed
- HTML axis label on a circular chart were causing unnecessary CPU usage in some setups.


## [5.4.6] - 2023-09-04

### Added
- When using the JSON parser, it's now possible to use a `"@series"` ref inside of a bullet to access the series of the bullet.
- When using the JSON parser, it's now possible to use `"#foo.get('bar')"` syntax to look up settings on the referenced object.

### Fixed
- In some cases `DateAxis` could error out when using time zones.
- Canvas container had `aria-hidden` was set to incorrect value.
- Bullets now work correctly with the JSON parser.


## [5.4.5] - 2023-08-26

### Added
- New method `addChildData()` added to `Hierarchy`. [More info](https://www.amcharts.com/docs/v5/charts/hierarchy/hierarchy-api/#Dynamically_adding_child_nodes).

### Fixed
- Vertical wheel-scrolling is no longer prevented if `wheelY: "none"` is set, regardless of the `wheelX` setting.


## [5.4.4] - 2023-08-18

### Added
- New setting on `Sankey`: `linkSort`. Set it to a custom function for sorting links, or to `null` to use link order from data.

### Changed
- Data items with `null` values will be ignored altogether when grouping data.
- [Reverted] Accessibility: focus element of the non-visible focusable items (e.g. buttons) will now have `aria-hidden` attribute set, so they are not read out by screen readers.

### Fixed
- In some setups month/year selectors were wrapping to two lines in a `DateRangeSelector`.
- Fixing issue with chart not showing up sometimes.
- `XYChartScrollbar` thumb area was not draggable since `5.4.3`.


## [5.4.3] - 2023-08-15

### Changed
- Accessibility: focus element of the non-visible focusable items (e.g. buttons) will now have `aria-hidden` attribute set, so they are not read out by screen readers.

### Fixed
- Fixing chart being resized incorrectly inside of nested flexbox. ([Issue 1044](https://github.com/amcharts/amcharts5/issues/1044))
- `SettingsModal` was not being disposed together with a `Root` with a `StockChart` in it.


## [5.4.2] - 2023-08-07

### Added
- New method on all axis renderers: `toGlobalPosition(position)`. Converts relative axis position taking into account its current zoom count.
- New setting on `FlowNodes`: `disabledField`. Allows pre-collapsing of nodes using data.

### Fixed
- Fixing the JSON parser to work with `geoJSON`.
- Fixing the JSON parser to work with `stops`.
- Fixing the behavior of `calculateSize` when using `transform: scale`.


## [5.4.1] - 2023-07-18

### Added
- All Flow (Sankey, Chord and Arc) nodes can be toggled (on by default). [More info](https://www.amcharts.com/docs/v5/charts/flow-charts/#Node_toggling).
- New `Flow` settings added: `hiddenSize` and `minHiddenValue`. [More info](https://www.amcharts.com/docs/v5/charts/flow-charts/#Node_toggling).
- Deviation added to editable `BolingerBand` settings (`StockChart`).

### Changed
- `Chord`'s default value of `"sort"` changed from `"descending"` to `"none"`.  This change was necessary for the new feature of [toggling nodes](https://www.amcharts.com/docs/v5/charts/flow-charts/#Node_toggling).

### Fixed
- `Label` with wrapping/truncation, containing only symbols like question mark could make the whole chart break in a dead loop.
- `exclude`/`include` settings on `MapSeries` was being ignored when new data was set for the series.
- `LineSeries` was not being included in the caluclation of min/max of the vertical `ValueAxis` if it did not have any data points in current zoom scope of the horizontal `DateAxis`.


## [5.4.0] - 2023-07-04

### Added
- New hierarchy-based series: Voronoi Treemap. [More info](https://www.amcharts.com/docs/v5/charts/hierarchy/voronoi-treemap/).
- New flow-based series: Arc Diagram. [More info](https://www.amcharts.com/docs/v5/charts/flow-charts/arc-diagram/).

### Changed
- Label wrapping mechanism will now treat a [zero-width space](https://en.wikipedia.org/wiki/Zero-width_space) character as a word break.


## [5.3.17] - 2023-06-28

### Added
- `getTooltipText()` method on `Axis` has a second parameter `adjustPosition` (default: `true`). Affects only `DateAxis`. If set to `false` will not adjust position before formatting date by base interval.
- `Root` element now has three additional settings: `focusable`, `ariaLabel`, and `role` (all are empty by default). [More info](https://www.amcharts.com/docs/v5/concepts/accessibility/#Accessibility_of_Root_element).

### Changed
- Accessibility: The `role` of the `<div>` element that holds focusable elements is changed to `graphics-document` (was `application`) to better reflect 	 interactive element. [More info](https://www.w3.org/TR/graphics-aria-1.0/#graphics-document).
- Accessibility: `<div>` element that holds `<canas>` elements has now `aria-hidden="true"` set.
- If using `type` with the JSON plugin, it will now always replace the existing Entity instead of merging.

### Fixed
- `ariaLabel` on horizontal scrollbar grips were being populated to a slightly wider range than actual range of the related `DateAxis`.
- `ExportingMenu` methods `open()` and `toggle()` were not working when attached to click events on external elements.
- Stock charts `DateRangeSelector` was allowing pickers to go outside selectable date range.
- The JSON plugin can now change properties on a `ListTemplate` (like `grid`). [More info](https://www.amcharts.com/docs/v5/concepts/serializing/#Templates).
- Tooltip was not always hidden when `sprite.hideTooltip()` was called.
- If a mouse pointer was over a `Sprite` and `tooltipPosition` was changed from `"fixed"` to `"pointer"`, it was not following mouse unless you unhovered and then hovered over sprite again.


## [5.3.16] - 2023-06-13

### Fixed
- Legend label's were losing their disabled state if labels were updated by moving cursor.
- `XYCursor` will no longre freeze when selecting and pointer moves out of plot area.
- `Treemap`'s focus navigation using arrow keys and `focusableGroup` was not working properly.
- `Annotator` plugin was sometimes retaining drawings after drawing was cancelled.


## [5.3.15] - 2023-06-01

### Fixed
- Dynamic updates to `geoJSON` on a `PolygonSeries` were not working since `5.3.13`.
- Updating data on a `PolygonSeries` was resetting map position.
- Memory leak when modifying `Legend` data fixed.


## [5.3.14] - 2023-05-30

### Fixed
- Interactive HTML tooltips with internal element structure were generating unohver events unnecessarily since `5.3.13`.


## [5.3.13] - 2023-05-30

### Added
- New setting `forceLTR` (default: `false`) on `NumberFormatter`. If set to `true`, will force all formatted numbers to be LTR, regardless of the direction settings on chart/page.
- `legend: true` added to `dataContext` of a legend bullet `DataItem` (bullets are created for LineSeries), just so it is possible to distinguish between bullets created for series and legend.

### Fixed
- `Hierarchy` was not not keeping its node toggle state after resize.
- In some cases `DateRangeSelector` was generating an error when zooming `SotckChart`.
- Always-on / on-click `Tooltip` was not being disposed properly when `Root` element was disposed.
- Memory leak was happening when disposing a `Container` with `verticalScrollbar` enabled.
- `PieSeries` was erroring if its `stroke` setting was set.


## [5.3.12] - 2023-05-05

### Added
- New locale: Faroese (fo_FO). Thanks Martin Puge.

### Changed
- The `min` and `max` settings are now optional for `IHeatRule` ([Issue 883](https://github.com/amcharts/amcharts5/issues/883)).
- Removed `xlsx` package (with vulnerability) from dependencies in favor of a bundled hard copy (version 0.19.3) due to their decision not to publish to NPM. ([Issue 897](https://github.com/amcharts/amcharts5/issues/897)).

### Fixed
- Events now work properly with open shadow DOM (but not closed shadow DOM).
- Fixed export of data freezing in some cases where there are visual elements on the chart that are constantly being updated.
- Using parentheses in the in-line number formatting function was not working as needed.
- Tapping on a touch display outside chart was applying default state to elements that weren't being "touch-hovered".
- `getDataItemById()` method was not working properly on `Hierarchy` series.


## [5.3.11] - 2023-04-07

### Changed
- Possibly a breaking change! All HTML content in tooltips now has interactivity disabled. If you have buttons/links or other interactive elements, you need to explicitly set `tooltip.label.set("interactive", true)`.

### Fixed
- HTML tooltips were flickering when moving pointer over them.
- Hierarchy drill-downs were broken in some cases (since 5.3.10).
- TAB-focusing of elements on the page might get stuck in a chart if tabbing started outside the document.


## [5.3.10] - 2023-04-06

### Added
- `homeRotationX` and `homeRotationY` settings added to `MapChart`. Allows setting home x and y rotations. The chart will rotate to provided values when `goHome()` method is called.

### Fixed
- Accessibility: Legend item's ARIA labels will not contain "Press ENTER to toggle" message if the `clickTarget = "none"` is set.
- Further improvements in rendering/sizing of the HTML-based tooltips.


## [5.3.9] - 2023-03-31

### Added
- New `PeriodSelector` setting: `hideLongPeriods`. Indicates whether to hide buttons for periods that are longer than the actual data on chart.
- New `DrawingControl` methods: `clearDrawings()` and `setEraser(true | false)`.
- Methods `hide()` and `show()` will now properly hide and show any indicator.
- `MapChart` methods `zoomToGeoPoint()` and `zoomToGeoBounds()` now accepts `rotationX` and `rotationY` parameters. If provided, the map not only zoom to the provided point/bounds but will rotate so that this point/bounds would be in the center. Mostly usefull with `geoOrthographic` projection.
- `MapChart`'s `convert()` method now accepts `rotationX` and `rotationY` optional parameters. If provided, the calculations will be done as if map is rotated by provided values.
- `MapPolygonSeries` / `MapPointSeries` method `zoomToDataItem()` now accepts an optional boolean `rotate` parameter. If it's `true`, the map will rotate so that this point/polygon would be in the center. Mostly useful with `geoOrthographic` projection.

### Changed
- Hiding a `StockPanel` via its `hide()` method will now animate it to size 0 before hiding completely.

### Fixed
- The scale of the `StockChart` could become incorrect if there were compared series and the scale was switched back and forth between logarithmic and regular.
- HTML-based tooltips were sized incorrectly in some cases.
- Setting `pointerOrientation` on a `Tooltip` was not updating an already visible tooltip.


## [5.3.8] - 2023-03-24

### Changed
- Auto-hidden (as per `oversizedBehavior: "hide"` setting) `Label` elements will now trigger `boundschanged` events.
- Defaults of `marginTop` and `marginBottom` set to `1` on all `ZoomControl` buttons.

### Fixed
- HTML-based tooltips were not being properly sized on first show unless Animated theme was enabled
- HTML-based tooltips were sometimes ignoring `keepTargetHover: true`.
- Tooltip positions were off when exporting a chart with `tooltipContainerBounds` set.
- `DrawingControl` can now be used completely standalone. [More info](https://www.amcharts.com/docs/v5/charts/stock/toolbar/drawing-control/#Standalone_usage_API).
- Internal tweaks that were occasionally interfering with some drag-and-drop libs.
- Horizontal columns were not being properly highlighted when gaining focus.
- Old bullets of data item were not being cleared if `series.data.setIndex` was used to update old data (since 5.3.7).
- `zoomToValues()` (and `zoomToDates()` by extension) method on `GaplessDateAxis` was not working correctly with a date range outside of actual data range.


## [5.3.7] - 2023-03-09

### Added
- New `calculateSize` setting on `Root`. This is needed if you are using a `transform: scale(...)` CSS style. [More info](https://www.amcharts.com/docs/v5/getting-started/root-element/#Custom_sizing_function).
- New settings on `DateRangeSelector`: `minDate` and `maxDate`. Allows restricting date selection to specific date ranges. [More info](https://www.amcharts.com/docs/v5/charts/stock/toolbar/date-range-selector/#Restricting_date_range).
- New events on `StockChart`: `drawingsupdated` and `indicatorsupdated`. Events kick in when drawings or indicators are added, updated, or removed. [More info](https://www.amcharts.com/docs/v5/charts/stock/serializing-indicators-annotations/#Events).

### Changed
- `DateRangeSelector` will now limit dates to actual range of data. To disable set `minDate` and `maxDate` to `null`. [More info](https://www.amcharts.com/docs/v5/charts/stock/toolbar/date-range-selector/#Restricting_date_range).

### Fixed
- `XYSeries` were creating `Bullet` objects even if distance between them was less than `minBulletDistance` which was not efficient and could slow the browser down.
- Fixed issue with mutating ES6 modules ([Issue 833](https://github.com/amcharts/amcharts5/issues/833)).
- Fixed more issues with `ghostLabel` obstructing interactivity for other labels.
- Bullet function was not being called when a single data item of the series was updated.


## [5.3.6] - 2023-02-27

### Added
- New `cors` setting for `Picture` (defaults to `"anonymous"`).
- `beginPath` method added to `CanvasGraphics`.

### Fixed
- Theme states no longer override user states.
- In some specific cases with stacked axes series position could be shifted up.
- In some specific cases a hairline of a column of a `ColumnSeries` could remain visible on the plot area even if the whole column was out of visible axis bounds.
- A `ghostLabel` was causing some interfering issues with interactive labels of an axis.


## [5.3.5] - 2023-02-24

### Changed
- Reverting "Fixing bug where click event was not dispatched on tooltips outside of the chart boundaries" introduced in `5.3.4` as it was causing other issues.

### Fixed
- Down state was changed to a default state if a draggable object was unhovered while dragging.


## [5.3.4] - 2023-02-20

### Added
- `cellWidth` read-only private setting added to `Axis`. Holds a distance in pixels between two grid lines. It might not be accurate as grid on `DateAxis` might not be at equal intervals.
- `getCellWidthPosition()` added to all axis types. Returns relative distance between two grid lines of the axis.

### Fixed
- HTML-based tooltip might produce a funky animation if it was displayed very close to the edge of the chart.
- `StockChart`'s X-axes from all panels not always were syncing properly between data updates.
- Fixing bug where click event was not dispatched on tooltips outside of the chart boundaries.
- Changing a color for a `LineSeries` in with a `StockChart` control was not changing its tooltip color.
- `GaplessDateAxis` was not taking into account missing dates when using `zoomToDates()` or `zoomToValues()` methods.
- When data grouping was on and data was changed, `ValueAxis` was zooming to incorrect position.
- Radial labels sometimes could get reversed when updating their settings.


## [5.3.3] - 2023-02-08

### Added
- New method on `Language`: `addTranslationsAny()`. Allows adding custom translations to locale. [More info](https://www.amcharts.com/docs/v5/concepts/locales/creating-translations/#Extending_locale_with_custom_prompts).

### Fixed
- In `StockChart` if "Reset" button was pressed when there were drawings present on the chart, it could freeze.
- Calling `dispose()` on a `StockToolbar` was not properly removing all DOM elements.
- `getCellWidthPosition()` method on a `CategoryAxis` was returning a wrong result.


## [5.3.2] - 2023-02-03

### Changed
- Panning/zooming with a right mouse button was disabled.

### Fixed
- `StockChart`'s panels date axes could go out of sync if data range was different. Now all X-axes will sync their `min` and `max`  to the axis of the main panel (one that contains `stockSeries`).
- `StockChart` could crash if the height of div was really small.
- Private settings `selectionMinFinal` and `selectionMaxFinal` were not being set on a `DateAxis`.


## [5.3.1] - 2023-01-31

### Added
- `mainDataItems` getter was added to `XYSeries`. Returns ungrouped data items array.

### Changed
- `crisp` is now set to `true` by default in `Tick` elements.

### Fixed
- If all values in a grouped period were null, series showed 0 instead of omiting data point when group value was set to "sum".
- Tooltip of a series with `maxTooltipDistance: -1` could be hidden when it should have been shown.
- Setting custom `stockSeries` on an indicator was not working (Chart was force-setting its own `stockSeries` on indicators).
- Fixing type error with `@types/d3-hierarchy`.


## [5.3.0] - 2023-01-27

### Added
- New plugin: `json`, which allows serializing and parsing serialized (JSON) configs into charts. [More info](https://www.amcharts.com/docs/v5/concepts/serializing/).
- New methods added to `StockChart`'s' `IndicatorControl` and `DrawingControl` used for serializing user-added indicators and annotations. [More info](https://www.amcharts.com/docs/v5/charts/stock/serializing-indicators-annotations/).
- `crisp` (default: `false`) setting added to `Sprite`. If set to `true`, will adjust `strokeWidth` to match screen zoom (retina) as well as its positions will be rounded up, so the lines look crisper. It's primarily meant for straight lines, but can work on other objects, too. Use with care, as coordinate rounding might produce overlapping or gaps between shapes that should be adjacent.
- New `Root` property: `accessible` (default: `true`).
- New `Root` property: `updateTick` (default: `true`). Set it to `false` to temporarily disable all rendering on `Root`. Reset back to `true` to resume rendering. Useful when need to do a bunch of async operations that might result in errors if rendering started before all of them finish.

### Changed
- `crisp` is now set to `true` by default on elements that use straight lines, like grid, ticks, resize button icon, etc.
- Removed grid opacity setting from default `StockChart` theme. Now it will be the same as regular `XYChart`.
- The generated code now uses `es2015` target instead of `es5`.

### Fixed
- Labels on a `GaplessDateAxis` might get hidden at some zoom levels.
- Eraser button on `StockChart` was not being unselected when other drawing tool was selected.
- `"YYYY"` (year of week) in date format was not working properly in all cases.
- Fixed two memory leak sources related to disposing of charts.


## [5.2.50] - 2023-01-20

### Fixed
- Maintenance release.


## [5.2.49] - 2023-01-20

### Added
- Bulgarian (bg_BG) locale added.

### Fixed
- Treemap went into Stack owerflow error if initialized in a hidden div.


## [5.2.48] - 2023-01-17

### Added
- Slovak (sk_SK) locale added.

### Fixed
- Grid was not being placed in correct place on a `DateAxis` with grid or grid interval in 30 minutes.
- Cursor tooltip was not being snapped to an `XYSeries` with `snapTooltip: true` when it was left of the first available data item.
- `PeriodSelector` was not properly zooming the X axis with a non-standard value in `firstDayOfWeek` locale.


## [5.2.47] - 2023-01-04

### Fixed
- `MapChart` with a legend could produce error (since 5.2.44).
- `ColumnSeries` with null values could display 1px height loose column on top of the plot container.


## [5.2.46] - 2023-01-02

### Fixed
- Setting `stockPositiveColor` and `stockNegativeColor` initially on a `StockChart` was not affecting colors of candlesticks.
- When `Tooltip` had `keepTargetHover: true` set, the portions of the tooltip outside the chart area were not being registered for hovers when the `Root` element had `tooltipContainerBounds` set.
- `DateAxis` with data grouping enabled could go into infinite loop of switching between period in some specific data setups.


## [5.2.45] - 2022-12-20

### Fixed
- `ZigZag` indicator was always using 5% deviation even if user set a different value.
- If data of a legend was updated, labels of a legend were not updated properly in all cases.
- A tooltip for a `ColumnSeries`/`CandlestickSeries` was not being hidden if a cursor was used and mouse was moved away from the chart.


## [5.2.44] - 2022-12-20

### Fixed
- If a `ForceDirected` node with `topDepth` set to `1` was clicked to hide children and then clicked again to reveal them, the clicked node was hidden. (since 5.2.42)
- `ValueAxis` with `min` and `max` set could result in an empty chart. (since 5.2.43)


## [5.2.43] - 2022-12-19

### Added
- An event `groupintervalchanged` added to `DateAxis`. Kicks in when data grouping is on, and current group interval changes, e.g. via zooming the chart.

### Fixed
- Setting `min` and `max` on a `DateAxis` which was not base axis of a series could result in a stack overflow error in some specific cases.
- `PeriodSelector` was not always highlighting the period button when period was selected via `selectPeriod()` method.
- `PeriodSelector` was not selecting proper start position on some platforms when data grouping was on and `selectPeriod()` was called immediately after initialization of the chart.


## [5.2.42] - 2022-12-16

### Added
- `reverseGeodata` setting added to `MapPolygonSeries`. If set to `true`, will reverse direction of polygon corners in GeoJSON.
- `linechanged` event added to MapLine.

### Fixed
- If a chart had multiple vertically stacked Y axes and `snapToSeries` was set, moving mouse to series in the bottom could cause chart cursor to disappear.
- A legend label for a `ZigZag` indicator was showning "NaN" instead of its `depth` value.
- Hierarchy series' `topDepth` setting was not working properly if set to `>1`.
- If a `Sprite` was hidden, it hid it's tooltip even if the tooltip at the moment was used by other element. This caused some wrong behavior with Axis tooltips, as all axis elements share the same tooltip.
- If a `MapLine` was changed and some `MapPoint` was assigned to this line, `MapPoint` was not always updating its position.
- Map with `geoAlbersUsa` projection was not working if `GraticuleSeries` was added to it.
- `MapLine` was showing tooltips in a wrong position (in case lines were not straight).
- `PeriodSelector` was not properly zooming whe data grouping was enabled.


## [5.2.41] - 2022-12-08

### Fixed
- Canvas left/top position was not set correctly (since 5.2.39).
- `Root`'s setting `tooltipContainerBounds` was not positioning itself outside of the chart if there was space in the chart itself (since 5.2.39).


## [5.2.40] - 2022-12-08

### Fixed
- `Root`'s setting `tooltipContainerBounds` was being ignored on an `XYChart` (since 5.2.39).
- HTML content was clipped to chart's dimensions even if `tooltipContainerBounds` was used.


## [5.2.39] - 2022-12-07

### Added
- `fillOpacity` setting added to `Label`.

### Changed
- The whole under-the-hood implementation of the `Root`'s setting `tooltipContainerBounds`. The change should be transparent, but please inform us if the functionality broke in some way.

### Fixed
- `GraticuleSeries` was not being redrawn if its `clipExtent` was being set after series was already rendered.
- `idField` was not being respected in some cases in a `MapSeries`.
- `MapPointSeries` was not setting map bounds properly if it did not contain any geometries (just points with lat/long).
- `keepTargetHover` on a `Tooltip` was not working when `tooltipContainerBounds` was used in `Root`.
- Some DOM elements were not being removed when element/Root was disposed.


## [5.2.38] - 2022-11-29

### Added
- `clipExtent` added to `GraticuleSeries`. If set to `true`, graticules will be drawn only within bounds of the polygons.

### Fixed
- `ZoomControl` position was wrong sice 5.2.36.


## [5.2.37] - 2022-11-29

### Fixed
- `neutral` is now optional in `IHeatRule`.


## [5.2.36] - 2022-11-29

### Added
- `affectsBounds` setting added to `MapSeries`. Previously only `MapPolygonSeries` affected chart bounds. Now you can tell `MapPointSeries` or `MapLineSeries` to affect map bounds. Or turn off bound checking for some `MapPolygonSeries`, e.g. for background/water.
- `neutral` setting added to `IHeatRule`. If you set some value (color for example), it will be used for items that do not have any value.

### Fixed
- If the last slice of a percent (pie) series slice was hidden, `valueSum` was calculated incorrectly (was using last items value instead of 0).
- `geoPoint()` method of `MapChart` was not working properly.
- `keepTargetHover: true` was not working on all `Hierarchy` charts.
- `ZoomControl` used to override its positional settings like `centerX`, `x`, etc.
- Fix for occasional "Value is not of type 'long'" error.


## [5.2.35] - 2022-11-24

### Fixed
- `exclude` and `include` were not working properly is set on a `MapLineSeries` or `MapPointSeries` (since last release only).


## [5.2.34] - 2022-11-24

### Added
- `backgroundOpacity` setting added to `Exporting`.
- `fixed` property added to `MapPointSeriesDataItem`. Allows sticking a point to screen coordinates, rather than to lat/long on the map.

### Changed
- Various containers in amCharts 5 div (HTML content, tooltips, alerts) will now have class names applied (`"am5-html-container"`, `"am5-reader-container"`, `"am5-focus-container"`, `"am5-tooltip-container"`) so that they can be targeted via CSS, e.g. `.am5-html-container { z-index: -1 }`.
- amCharts will no longer fail if `StyleRule` is created with unparsable selector.

### Fixed
- Labels on `Sunburst` full circle slices were not being properly truncated/sized.
- `startLocation` and `endLocation` was being ignored by `GaplessDateAxis`.
- Dynamically-added heat rules (after series was already created) were not working.


## [5.2.33] - 2022-11-18

### Added
- New pattern type `PathPattern`. Allows using SVG paths as patterns. [More info](https://www.amcharts.com/docs/v5/concepts/colors-gradients-and-patterns/patterns/).

### Changed
- Circular labels (`RadialLabel` with `textType: "circular"`) now have a limited support for `oversizedBehavior`. `"hide"` and `"truncate"` are now supported. The latter will not respect `breakWords` setting, though.

### Fixed
- Hovering, clicking, and unhovering a `PieSeries` slice would not reset its size properly.
- `Label` background was not being sized properly when `fontWeight: bold` was set.
- Dynamically setting `include` or `exclude` on a `MapPolygonSeries` was not updating it until data was re-validated.
- Circular labels on a `Sunburst` diagram were not being positioned properly.


## [5.2.32] - 2022-11-15

### Added
- New global property `am5.registry.version` added. Contains the version of the library.
- `lineType` added to `IMapLineSeriesDataItem`. Allows setting `"straight"` or `"curved"` line type for each map line individually.

### Fixed
- `Label` was ignoring individually-set formatters when formatting number/date/duration values in its text.
- Invoking `PeriodSelector` method `selectPeriod` will now properly highlight related button in selector.
- setting wheelY and WheelX to "none" after the map chart was initialized did not remove wheel behavior.
- Fixed flag bug with `A` and `a` commands in SVG paths.


## [5.2.31] - 2022-10-18

### Changed
- The logic behind `"pro"` tag in `CandlestickSeries` has been updated to more commonly accepted standards. [More info](https://www.amcharts.com/docs/v5/charts/xy-chart/series/candlestick-series/#Professional_candlesticks).
- "Pro Candlesticks" was renamed to "Hollow Candlesticks" in series type switcher in `StockChart`.

### Fixed
- Stacked axis bullets were being positioned not right on the axis but somewhat higher, depending on the number of bullets.
- More ARIA errors fixed in `ExportingMenu`.
- Using arrows to move focused draggable elements was acting unpredictably if mouse was being used, too.
- Further improvements in cursor tooltip arrangement logic.


## [5.2.30] - 2022-10-14

### Added
- `"click"` option added to `showTooltipOn` setting. If set, tooltip will appear when clicking/tapping the element, rather than on hover.
- `ExportMenu` has two new private settings: `menuElement` and `listElement`. Holds actual DOM elements of the menu items.

### Changed
- Disposing `Exporting` object, will now dispose related `ExportingMenu`, if set.
- `Legend`'s item containers will now have `role="checkbox"` set by default.
- Setting `focusable: true` on `XYCursor`'s `lineX` and/or `lineY` will enable moving them with keyboard's arrow keys.
- Better arrangement of tooltips on an `XYChart` with multiple tooltips on the same data point and an `XYCursor` (less chances tooltips going off-screen).

### Fixed
- In some situations chart was not resizing correctly.
- If `sequencedAnimation` was set to `true` on a `LineSeries`, it was drawing line to 0 while animating series.
- `ExportMenu` was using a non-existent "aria" attribute.
- When `snapToSeries` was set on an `XYChart`, zooming to a selection with the cursor produced wrong zoom.
- `XYChart` with `DurationAxis` could freeze the browser in certain configurations and chart sizes.
- `LineSeries` used to draw a line to null values while series was animating (if `sequencedAnimation` was set to `true`).
- Eliminating warnings about `getImageData()` on the new Chrome.


## [5.2.29] - 2022-10-07

### Added
- Additional option for `Label`'s `oversizedBehavior` setting: `"wrap-no-break"`. If set, the labels will wrap to `maxWidth`, but will not brak words even if they do not fit.

### Fixed
- If timezone was set in a chart with a `DateAxis` with `baseInterval` set to `"day"`, axis could show wrong date and axis tooltip could snap to a wrong date on a DLS switch.


## [5.2.28] - 2022-10-06

### Added
- `stacked` setting added to `AxisBullet`. If set to `true` and multiple data items (axis ranges) were added to the same date/category, bullets will be stacked on top of each other.

### Fixed
- If a timezone was set and `baseInterval` was a `"month"`, tooltip could show incorrect date value on a month when DLS happened.
- If a new slice was added to `PercentChart` after the initial data was set, the new slice was using first color from colorset instead of the next one.
- Some sprites were not dispatching `boundschanged` event when their settings affecting the bounds were being changed.


## [5.2.27] - 2022-10-04

### Fixed
- `"average"` value of grouped data items was not being calculated properly.
- `WordCloud` was ignoring the `fill` value from label `templateField`.


## [5.2.26] - 2022-09-27

### Fixed
- Version bump.


## [5.2.25] - 2022-09-27

### Fixed
- Using `tooltipContainerBounds` could break layout for the whole document.


## [5.2.24] - 2022-09-27

### Added
- `lineType` (`"curved"`, `"straight"`) added to `MapLineSeries`. `"curved"` (default) connects points using shortest distance, which will result in curved lines based on map projection. `"straight"` connects points using visually straight lines, and will not cross the -180/180 longitude.
- `tooltipContainerBounds` added to `Root` settings. Allows defining margins around chart area for tooltips to go outside the chart itself.

### Changed
- If `tooltipLocation: 0` on a `DateAxis`, it will snap to the closest position now. Previously it snapped to the date over which mouse pointer was, this was not user-friendly in some setups. The same logic now applies to the `CategoryAxis` as well.

### Fixed
- WVAP indicator was showing ZigZag instead.
- Zoom-out button sometimes used to appear while initial animation was playing. Note: if `sequencedAnimation == true`, it will appear anyway.
- Fixed styles issue with date picker in `StockChart`.
- The last bullet of a series could become hidden if `baseInterval` was set to `"month"` on a related `DateAxis`.


## [5.2.23] - 2022-09-20

### Fixed
- On a chart with cursor and `tooltipText` set directly on series' columns, the tooltip was not being shown (since 5.2.19).
- On a chart with X axis `endLocation: 0`, Y axis was not autozooming properly.


## [5.2.22] - 2022-09-15

### Added
- ZigZag indicator added to `StockChart`.

### Changed
- `"%"` number formatting modifier will now consider locale when choosing whether percent sign goes before or after the number. At this moment only `tr_TR` (Turkish) locale is placing percent sign before number.
- `StockChart` indicators, that were using black (`0x000000`) color as a default series color now use `alternativeBackground` color of a theme (they'll now be white if "Dark" theme is used).

### Fixed
- Stock toolbar dropdown items will now display proper `title` attribute.
- HTML tooltips were flashing an unpositioned content briefly.
- The `"Z"` date formatting option was not taking into account Root element's `timezone` setting.
- If a timezone was set on a chart and data grouping was on, the grouping was not paying attention to the timezone.
- If a timezone which was not using DST was set on a chart, and user was in a timezone which used DST, the axis labels were shifted by 1 hour in some setups.
- `GaplessDateAxis` was not working properly with a timezone set.
- `DateAxis` fills that should have been visible were hidden in some cases.
- `StockChart` was incorrectly switching to percent mode when last of the compared series was removed.
- `"p"` number formatting modifier added. Works the same way as `"%"` except it treats numbers as absolute values and does not multiply them by 100.


## [5.2.21] - 2022-09-08

### Added
- Trix, Median Price, and Typical Price indicators added to `StockChart`.
- `valuePercent` was added to `Hierarchy` data items. Indicates percent value based on the value of its direct parent.

### Fixed
- Using relative height of the chart container within a fixed-width wrapper could cause flickering or scrollbars.
- Period values in a `StockChart` indicators were shown with decimal values.
- Fixed a typo in `StockChart` list controls.
- `valuePercentTotal` was not working in `Hierarchy` data items.


## [5.2.20] - 2022-09-05

### Added
- All indicator series will now have `"indicator"` theme tag set. Detect indicator series via `series.hasTag("indicator")`.
- `autoZoom` added to `ValueAxis` (default: `true`). If set to `false`, the axis won't be auto-zoomed to a selection (this works only if the other axis is a `DateAxis` or a `CategoryAxis`). This setting will be ignored if both X and Y axes are a `ValueAxis`.
- `StandardDeviation` indicator added.

### Changed
- Series edit modal on a `StockChart` would show incorrect controls if the main chart series was a `LineSeries`.

### Fixed
- Initial sizing of HTML tooltips fixed (again).
- Exporting a chart in a `<div>` with `height: auto` was not working properly.
- If a point in a `LineSeries` was way out of bounds (million times further than the bounds of plot area), the line could disappear.
- In some cases, if chart was using loadable fonts, it could go into non-stop flickering mode.
- `StockChart` with drawing mode disabled could start drawing new objects if clicked on points of an old drawing.
- `PointedRectangle`, mostly used by a `Tooltip` was drawn incorrectly if its stem size was bigger than height.
- Removing a `QuadrantLineSeries` drawing from a `StockChart` resulted an error.
- It was impossible to delete `Fibonacci` or `FibonacciTimezone` drawings one by one after switching to another drawing tool.


## [5.2.19] - 2022-08-26

### Added
- `geoPoint()` method added to `MapChart`. Returns a geoPoint of the current the center of the map viewport.
- `pancancelled` event added to `XYChart`. It will kick in if pointer is pressed down and released without moving. `panended` event will still kick in.
- `originalEvent` added to `panstarted`, `panended`, and `pancancelled` events.

### Fixed
- Tooltips were not working properly on an `XYChart` if they were placed in a separate root element.
- If an `XYChart` with a `CategoryAxis` had series with missing values, zooming to the part of a series with no data caused value axis not to zoom according to the selection.
- HTML-based tooltips were leaving a visible (albeit transparent) DOM element after tooltip was hidden.
- Clear and erase buttons were not clearing/erasing all the drawings of StockChart properly.


## [5.2.18] - 2022-08-24

### Added
- `disabled` key support added to `DropdownList` item interface.

### Fixed
- Removed leftover debug code in `IndicatorControl`.
- `selected` event in `IndicatorControl` was not firing.
- Adding an adapter on Y-axis' labels could cause flickers on the chart.
- `maxWidth`/`maxHeight` of a `Container` was ignored when arranging objects by Horizontal or Vertical layout.
- `maxWidth`/`maxHeight` of a `Container` was ignored when drawing background.


## [5.2.17] - 2022-08-17

### Added
- `IndicatorControl` setting `indicators` now accepts objects. [More info](https://www.amcharts.com/docs/v5/tutorials/creating-custom-indicators-for-a-stock-chart/#Adding_to_toolbar).
- `getArea()` method added to `MapChart`. Returns area of a `MapPolygon` in square pixels.


## [5.2.16] - 2022-08-16

### Changed
- A clicked `PeriodSelector` button will now stay highlighted until other button is clicked, or chart is zoomed in any other way.
- `SpriteResizer` class moved to main package. It's now accessible via `am5.SpriteResize`.

### Fixed
- Better initial sizing of HTML-content tooltips.
- `MapChart` pan bounds were incorrect after size of a chart's div changed significantly.
- If a panel with a volume series of `StockChart` or volume series itself was removed, adding indicators after this was resulting in an error.
- On a chart with a `CategoryAxis` and series with non-consistent data, some data items might become invisible in some cases.
- Removing a point from `MapPointSeries` was not affecting the `MapLineSeries` with lines that had this point in their `pointsToConnect` setting.
- A `Label` rotated at `-90` angle was not being properly hidden as per `oversizedBehavior: "hide"`.
- Opening a settings modal from `StockLegend` would cause chart to be panned/zoomed when modal was claused.


## [5.2.15] - 2022-08-06

### Added
- Added `PicturePattern` that allows using external images as patterns. [More info](https://www.amcharts.com/docs/v5/concepts/colors-gradients-and-patterns/patterns/#Image_patterns).

### Fixed
- Fixing issue where chart scrollbar would break when zooming.
- Fixing chart being too large and overflowing when zooming in ([Issue 471](https://github.com/amcharts/amcharts5/issues/471)).
- `pan:"zoom"` was not working on left-side Y Axis.
- Removing a panel from a `StockChart` was not removing indicator from charts `indicators` list.
- Zooming chart with custom timezone was resulting in errors in some cases.


## [5.2.14] - 2022-07-23

### Added
- New setting `keepTargetHover` added to `Tooltip` (default: `false`). If set to `true`, hovering the tooltip will be treated like hovering its target element itself.

### Fixed
- Removing `verticalScrollbar` from a `Container` was causing some issues.
- Labels with HTML content and horizontal padding were not being sized/centered properly.
- Date formatting code "EEEE" was producing weekday's short version ("Tue") instead of full one ("Tuesday").
- `Scrollbar` was not working after it was zoomed and clicked on a background to change position, if no animated theme was used.
- Paused animations will no longer obstruct chart export.


## [5.2.13] - 2022-07-19

### Fixed
- Only HTML content will be shown on a `Label` with both `text` and `html` set.
- HTML content will now respect `padding*` settings.
- `"click"` event now works on an element that uses HTML content.
- `snapToSeries` of `ChartCursor` was not working if target series had only one data item.
- Labels of a `PieSeries` were being arranged incorrectly when pie was a semi-circle and `alignLabels` was set to `true`.
- `ForcedDirected` and `Tree` charts were not working properly with `BreadcrumbBar` navigation.


## [5.2.12] - 2022-07-18

### Fixed
- HTML content in tooltips was not being resized properly.


## [5.2.11] - 2022-07-18

### Added
- A new setting `deactivateRoot` (default: `true`) added to `Modal`. Indicates if any interactivity on the underlying chart should be disabled when modal is open.
- A new setting `html` added to `Container`. Set it to a string with HTML to be used as container's content. Will work on any element inheriting from `Container`, e.g. `Label`. [More info](https://www.amcharts.com/docs/v5/concepts/common-elements/html-content/).
- A new setting `labelHTML` added to `Tooltip`. If set, will ne used as HTML content for the tooltip. [More info](https://www.amcharts.com/docs/v5/concepts/common-elements/html-content/).
- A new setting `tooltipHTML` added to `Sprite`. If set, will ne used as HTML content for the tooltip when element is hovered. [More info](https://www.amcharts.com/docs/v5/concepts/common-elements/html-content/).
- `wheelZoomPositionX` and `wheelZoomPositionY` added to `XYChart`. This value is not set by default, but you can use it to fix wheel zooming, to the end (if you set it to 1) or to the start (0) or middle (0.5). In `StockChart`, it is set to 1 by default, as this is common practice in financial charts.
- "Volume-Weighted Average Price (VWAP)" indicator added to `StockChart`.

### Changed
- Setting `id` setting when creating an object will not register it in `am5.registry.entitiesById` immediatelly, without waiting for the next frame.

### Fixed
- `RadialGradient`'s `x` and `y` settings were being ignored.
- Labels as bullets with `oversizedBehavior` set were not being displayed properly in some cases.
- `DateAxis` with `startLocation = 0.5` and `endLocation = 0.5` and single value only was showing a really big date range.
- Resizing `PieChart` to a very small size with a legend positioned on the left or right could cause some anomaly in layout.
- Updating `CategoryAxis` data with less items than there was originally was causing old columns/bullets to be shown.
- Setting `verticalScrollbar` on `Container` to `undefined` to remove a previously set scrollbar was not working.
- On some rare cases, when all values of the series were the same or the difference was very small, ValueAxis could go into stackowerflow and hang the browser.

## [5.2.10] - 2022-06-28

### Added
- `lineJoin` setting added to `Graphics` (default: `"miter"`). Possible values: `"miter"`, `"round"`, and `"bevel"`. [More info](https://developer.mozilla.org/en-US/docs/Web/API/CanvasRenderingContext2D/lineJoin).

### Fixed
- `GaplessDateAxis` with one data item was not showing date label at all.
- Setting `colors` on a `ColorSet` will now properly reset all iterators, so that new color generation is consistent.
- If `data.setAll()` was called on a `MapSeries` with `geoJSON` set previously, objects from geoJSON would disappear.
- `PieSeries` was not keeping active slice pulled out when it was hidden and then shown up again.
- PDF export was not taking page orientation into account when auto-fitting an image.


## [5.2.9] - 2022-06-21

### Added
- New properties on `Root`: `tapToActivate` (default: `false`) - if enabled, requires to tap on chart pefore gesture-based functionality (zoom/pan) works, and `tapToActivateTimeout` (default: `3000`) - milliseconds of inactivity before chart becomes "inactive" for touch gestures. [More info](https://www.amcharts.com/docs/v5/getting-started/root-element/#Touch_related_options).

### Changed
- If there are no pan/zoom functionality set on charts, they should not prevent scrolling of the page by touch anymore.
- Bullets will no longer knock off user-set `maxWidth` on their `sprite` element.

### Fixed
- `DateRangeSelector` was not updating its label correctly when dates were picked.
- `LineSeries` with `templateField` and a lot of data items could cause chart to crash.


## [5.2.8] - 2022-06-15

### Added
- Private (read-only) setting `tooltipPosition` added to `Axis`.
- `"line-through"` label decoration added. Works both via `Label`'s `textDecoration` setting, and in-line, e.g. `This is [line-through]a crossed out text[/]`.
- `autoScale` (default: `false`) setting added to `MapPointSeries`. If set to `true`, bullets will resize together with a map while zooming.
- `PieSeries` and `FunnelSeries` now properly support bullets.

### Fixed
- Changing randius or innerRadius on a PieChart was not working.
- Changing legendValueText or legendLabel text on PercentSeries was not working.
- `exportfinished` event was not kicking in.
- Exporting plugin will now try to finish any ongoing rendering before genrating export image.
- Using mouse wheel on a non-chart element that is positioned over the chart works properly now.
- If some non-chart element was rendered over `Scrollbar`, doublicking on a thumb area would still zoom it out.
- Adding `click` event to an `XYChart` was causing it to pan a little when clicked.


## [5.2.7] - 2022-06-07

### Added
- `minDistance` to `LineSeries` (default: 0). If set, it will skip line points closer than X pixels, resulting in a smoother, less cluttery line.
- `isVisibleDeep()` method to `Sprite`. Check not only if `Sprite` itself is visible, but also its all ascendants.

### Changed
- TAB press should now skip over focusable elements of hidden series.

### Fixed
- Toggling `PieSeries` `alignLabels` after the chart was initialized was not working.
- Fixing bug where the wheel event would sometimes not trigger.
- When setting `stockSeries` with a new series on `StockChart` it was not inheriting `stockPositiveColor`/`stockNegativeColor` values.
- Tweaked default `StockToolbar` CSS to act better on pages with larger font sizes.
- DOM elements for focusable series items (columns, bullets, etc.) were being left behind when data for series was updated.
- Exporting chart to image was not inheriting document styles properly.
- If stock series increase/decrease colors were changed and then a series type was changed, new series used to reset colors and not use the ones user set.
- Dynamically changing page-wide font-related CSS (e.g. via media queries) could cause visual anomalies on the chart, especially on axes.


## [5.2.6] - 2022-05-25

### Added
- `nodePadding` added to `Pack`.
- `maxTooltipDistanceBy` with possible values `"x"`, `"y"`, and `"xy"` added. Indicates how distance from mouse pointer to the tooltip point should be measured when comparing with `maxTooltipDistance`.

### Fixed
- Exporting chart image was creating leftover canvas elements in the body of the document.
- Further improvements in `DateAxis` performance with grouping and timezone enabled.


## [5.2.5] - 2022-05-19

### Fixed
- When timezone was set, grouping days into weeks could produce some unexpected results.
- `GaplessDateAxis` first date of a month sometimes could go before the grid of a month.
- Improved performance with data grouping enabled on `DateAxis`, especially when timezone was set. Please note that using timezones will still affect the performance significantly.


## [5.2.4] - 2022-05-17

### Added
- `handleWheel()` method added to `XYChart`. Use it to mirror the same behavior as if the wheel was used on plot area.
- `useDefaultCSS` (default: `true`) setting added to `DateRangeSelector`.
- `inversed` added to `Tree` series. If set to `true`, will flip the direction of the tree.

### Fixed
- `StockToolbar` default CSS was using unnecessarily high `z-index` for its buttons.
- `StockToolbar` datepicker's style was off in some cases.
- `GaplessDateAxis` could display the same month name label two times in a row in some cases.


## [5.2.3] - 2022-05-12

### Changed
- Upgraded versions of `pdfmake` and `xlsx` dependencies.
- Reseting `x` and `y` of the `ForceDirectedSeries` data item will make the node be not ifxed anymore.
- Tweaked styles of `StockToolbar` controls to work better with theme colors.

### Fixed
- Enclosing multi-word parameters in in-line styles were not working.
- `DateAxis` was producing an error if series had no initial data and timezone was set on a root element.
- Vertically-stacked Y-axes was incorrectly plotting related series with Y-axis set as base axis.


## [5.2.2] - 2022-05-03

### Fixed
- Style issue with stroke style selection button in `StockChart` drawing mode.


## [5.2.1] - 2022-05-03

### Added
- `centerMapOnZoomOut` setting added to `MapChart` (default: `true`). Means the map will center itself (or go to `homeGeoPoint` if set) when fully zoomed out.
- `getGroupInterval(duration)` method added to `DateAxis`. Returns a time interval axis would group data to for a specified duration.
- `getIntervalMax(interval)` and `getIntervalMin(interval)` methods added to `DateAxis`. These methods return `min` and `max` of a specified time interval.

### Changed
- Axis fills on a `StockChart` are now not visible by default.
- All `Chart` elements now have `interactiveChildren: true` set by default, so that adding events on a chart does not automatically make all elements in it interactive.
- Zooming out `MapChart` using mouse wheel will now auto-center the map by default. Set `centerMapOnZoomOut: false` to bring back old behavior.

### Fixed
- Changing `inside` and `opposite` of `AxisRendererX` or `AxisRendererY` after the axis was already initialized was not working properly.
- `StockChart`'s' period selection buttons were not zooming to exact dates when data grouping of an X-axis was turned on.
- `StockChart`'s' series type switcher was not switching series properly when data grouping was enabled.
- `StockChart`'s' series type switcher was not switching series properly when comparing mode was on.
- If a `StockChart` was in percent scale mode, adding an indicator which was not on a separate panel was resulting in the indicator using wrong scale.
- Fixed week number calculation (again).
- Fixed CSS of `StockToolbar` for FireFox.
- Pinch-zoom of `MapChart` was ignoring `minZoomLevel` and `maxZoomLevel` settings.


## [5.2.0] - 2022-04-29

### Added
- Initial (beta) version of `StockChart` added. Check [documentation](https://www.amcharts.com/docs/v5/charts/stock/) and [product info](https://www.amcharts.com/stock-chart/).

### Fixed
- Week numbers for "leap weeks" were not being formated properly.
- Removing an axis range with a bullet was not removing the bullet itself.
- If one of the series had less data than another and their date axis had data grouping enabled, data of a series with less values could be not grouped.
- `ColumnSeries` was not coloring its legend marker initially if `useLastColorForLegendMarker` was `true`.
- Hovering on `ExportingMenu` was permanently disabling chart interactivity.


## [5.1.14] - 2022-04-22

### Fixed
- `ValueAxis` with a logarithmic scale was not showing some of the labels in some specific cases.
- Moved `zoomOutButton` of `XYChart` to `topPlotContainer` to solve unwanted zoom when cursor's `snapToSeries` was set.
- Initially-hidden series legend markers were not being dimmed out unless Animated theme was in use.
- When whole series was out of selected scope, its last or first value (depending on seleciton) was still included when calculating min and max, causing chart not to adjust min/max values to a visible series scope.
- `Annotator` was not disabling chart interactivite when activated in Firefox.


## [5.1.13] - 2022-04-15

### Added
- `useLastColorForLegendMarker` setting added to `BaseColumnSeries` (applicable to all column-based series like `ColumnSeries`, `CandlestickSeries`)
- `geodataNames` setting added to `MapSeries`. Allows setting translations to map features, e.g. countries. [More info](https://www.amcharts.com/docs/v5/charts/map-chart/map-translations/).
- Read-only private setting `gridInterval` added to `DateAxis`.

### Fixed
- If geoJSON contained multipolygons with just one polygon, hovering over polygon was resulting in a JS error.
- `DateAxis` displayed wrong time when time was switching to DST, when a timezone was set on a `Root` element.


## [5.1.12] - 2022-04-07

### Fixed
- Rounding a Date during daylight saving hour could produce incorrect result in some specific cases.


## [5.1.11] - 2022-04-06

### Added
- `groupDataWithOriginals` and `groupDataCallback` settings added to `XYSeries`. [More info](https://www.amcharts.com/docs/v5/charts/xy-chart/axes/date-axis/#Custom_aggregation_functions).
- `strictMinMaxSelection` setting added to `ValueAxis`. When set to `true`, the axis won't round `min` and `max` of a selection to the nearest round values, but will use actual min and max (`extraMin` and `extraMax` will still be added if set). This is a good feature when your series displays not actual but derivative values, like `valueYChangeSelection` as it helps to avoid frequent jumping of series to adjusted min and max of the axis.

### Changed
- Internal layout of `XYChart` containers was changed. `plotContainers` now goes to `yAxesAndPlotContainer`, and `plotContainer` and `topPlotContainer` goe into `plotContainers`.

### Fixed
- If `XYChart` was used without animated theme, and scrollbar's background was clicked to zoom to some specific spot, it resulted in scrollbar not being updated anymore when zoomed with wheel or zoom-out button.
- Fixed and issue where nodes of `ForceDirected` series were flickering to 0,0 point when div of a chart was resized.
- Fixed potential XSS injection issue with the accessibility of tooltips.
- `container` setting in `ExportingMenu` was being ignored.
- In some specific cases not all series were included in min/max calculation of a `ValueAxis` resulting not all series to be visible.
- When whole series was out of selected scope, its last or first value (depending on seleciton) was still included when calculating min and max.
- Layouts were allocating space for margins of hidden items.


## [5.1.10] - 2022-03-30

### Added
- New in-line text formatting property `verticalAlign` added. Currently supports only `"super"` and `"sub"` values. E.g. `Copyright[fontSize: 8px; verticalAlign: super;]TM[\]`.

### Changed
- Logarithmic scale on `ValueAxis` was revamped with a different approach. No changes from the configration, but might influence appearance/scale.
- When calculating derivative values for series, `low`, `high`, and `open` used previous `low`, `high`, and `open` values. Now they all use `value` instead.
- Updated to D3 v7.

### Fixed
- In some cases, using a text placehodler, an empty string was shown insteaf of a zero.
- Some grid container masking issues fixed.
- Sometimes `valueAxis` was zoomed-in a bit on the first render of an `XYChart`.
- Axis ranges with `dRadius > 0` were not visible on `RadarChart`.
- Dynamic change of `value*Show` fields of an `XYSeries` was not working.
- Removing data from a legend could lead to JS errors in some particular cases.
- Ghost label was creating a gap in an `XYChartScrollbar` between scrollbar bottom an scrollbar series.


## [5.1.9] - 2022-03-17

### Fixed
- Fixed the issue with resizing a chart inside of a flexbox. ([Issue 311](https://github.com/amcharts/amcharts5/issues/311))
- Fixed jumpy axis when panning an `XYChart` with mouse wheel.
- Panning XYChart with mouse wheel had incorrect direction if axis was inversed.
- If axis range had a gradient fill, gradient used to spread only through visible area, making it look icorrect.
- After pinch zooming and `XYChart` or zooming the chart with no animated theme used, CPU usage used to increase.
- `DateAxis` with `baseIntervals` `timeUnit` set to `"month"` could show incorrect month in the axis tooltip.
- If a `Graphics` had a gradient `fill`/`stroke` and initially was invisible, setting it to visible did not make the gradient to appear.
- While zooming `LineSeries`, a part of the line to the left of the first visible data point could disappear.


## [5.1.8] - 2022-03-10

### Added
- Settings `pinchZoomX` and `pinchZoomY` (defaults: `false`) added to `XYChart`. If set to `true` will allow pinch-zooming of a chart on touch devices. NOTE: these settings are not supported on `RadarChart`.
- `topPlotContainer` added to `XYChart`. It's a `Container` that can be used to place element over plot area.

### Changed
- The types for adapters has been changed to be more intuitive and useful. ([Issue 312](https://github.com/amcharts/amcharts5/issues/312))
- Tapping an element on a touch device will now generate `pointerover` event in addition to `click`. When tapped somewhere else, `pointerout` event will be triggered.

### Fixed
- Fixing ES6 module detection by BundlePhobia again ([Issue 294](https://github.com/amcharts/amcharts5/issues/294)).
- Pinch-zooming of a `MapChart` was not working well in some cases.
- `maxHeight` setting in `Sprite` was not working.
- Change of `minWidth` was not being applied at once, only if some other changes triggered chart to be redrawn.
- Changing or not setting data on an existing `FlowChart` was resulting in a JS error.
- `maxPanOut` setting in `MapChart` was not working.


## [5.1.7] - 2022-02-28

### Fixed
- Grouping to periods where `timeUnit` was `"day"` and `count > 1` was not working properly.
- When tooltips of multiple series were pointing at the same point, series order was not being respected (FF only).
- If a scrollbar was added before axes, scrolling series could result series to be out of sync with bullets.
- Tweaked `nb_NO` locale to better correspond to Norwegian Bokm? date formats.


## [5.1.6] - 2022-02-23

### Fixed
- Totals were not calculated until some interaction with `XYChart` chart if data was grouped initially.
- When tooltips of multiple series were pointing at the same point, series order was not being respected.
- Reverting "Fixing ES6 module detection by BundlePhobia" from 5.1.5 which was causing issues.


## [5.1.5] - 2022-02-22

### Added
- `minSize` setting added to `Flow` (`Chord` and `Sankey`) series. It's a relative value to the sum of all values in the series. If set, this relative value will be used for small-value nodes when calculating their size. For example, if it's set to `0.01`, small nodes will be sized like their value is 1% of the total sum of all values in series.

### Changed
- Direction of vertical panning with mouse wheel in an `XYChart` was inverted to make it consistent with OS native scrolling direction.

### Fixed
- Fixing ES6 module detection by BundlePhobia ([Issue 294](https://github.com/amcharts/amcharts5/issues/294)).
- Parsing of dates using `"i"` format was not working properly when no milliseconds were supplied.
- Using `minZoomCount` and `maxZoomCount` on a `GaplessDateAxis` was not working properly.
- Sometimes vertical `XYChart` scrollbar was not reacting to chart's pan via mouse drag or wheel.
- Using mouse wheel on a chart that was setup to pan was also zooming in/out in addition to pan.
- In some cases grid on `GaplessDateAxis` was not being placed properly. Grid and Label placement improved.
- `ForceDirectedTree` could freeze when used with Animated theme in some cases.
- Changing of baseInterval on DateAxis was not properly working in some cases.
- In some cases, when no animated theme was used, a state on a Sprite was not applied.
- Setting data on `MapSeries` after `geoJSON` was updated was not working properly which resulted heat rules not to be applied.
- It was difficult to make a selection close to the start/end of plot area on `RadarChart`.
- When `XYChart` was fully zoomed in, using mouse wheel would start panning the chart instead of zoom.


## [5.1.4] - 2022-02-11

### Added
- `affectsMinMax` added to value axis range.
- `segments` property added to `Line` class. Allows passing multiple segments instead of continous line.
- `tooltipIntervalOffset` setting added to `DateAxis`. If not set, axis' tooltip will use value of the `-tooltipLocation` (cell start timestamp by default), so that tooltip would should rounded value, like 06:00 instead of 06:30 when interval is hourly. [More info](https://www.amcharts.com/docs/v5/charts/xy-chart/axes/date-axis/#Axis_tooltip).
- `tooltipDateFormats` setting added to `DateAxis`. Allows specifying axis' tooltip date formats for time each time unit, different from `dateFormats`. NOTE: `tooltipDateFormat` will override the format if set. [More info](https://www.amcharts.com/docs/v5/charts/xy-chart/axes/date-axis/#Axis_tooltip).
- `syncWith` setting added to `XYCursor`. Set it to an array of other `XYCursor` objects to automatically position them as the cursor moves. [More info](https://www.amcharts.com/docs/v5/charts/xy-chart/cursor/#syncing-cursors).

### Changed
- Default tooltip date formats have changed slightly for `DateAxis`. Previously, it was using formats from `dateFormats`. Now it uses defaults/user values from newly-introduced `tooltipDateFormats` setting.

### Fixed
- In some cases `DurationAxis` with "second" as its base duration was going to stack overflow.
- Background on a `ValueAxis` was not showing.
- Improved performance for charts with lots of stacked series with null.
- Fixing mouse position when using `transform: scale` or `zoom` ([Issue 258](https://github.com/amcharts/amcharts5/issues/258)).
- Some touch interactions were not working in iOS 12.


## [5.1.3] - 2022-02-03

### Added
- Added second parameter to `Root` constructor which contains settings object. For now, there's only one setting: `useSafeResolution` (default: `true`). [More info](https://www.amcharts.com/docs/v5/getting-started/root-element/#settings).

### Fixed
- Dynamic data updates on `MapPolygonSeries` were not working in some cases.


## [5.1.2] - 2022-02-01

### Added
- `"x!"` and `"y!"` options added to `XYCursor`'s `snapToSeriesBy` setting. Setting it to `"y!"` will make cursor will choose the nearest data point to snap to by measuring only
vertical distance and looking at the data items which are at the current X axis position (date or category). The same applies for `"x!"`.
- `tooltipDataItem` setting added to `XYSeries`. It's a read-only reference to a data item which series tooltip currently uses.

### Fixed
- `LineSeries` legend markers' stroke was not using series' color if `series.appear()` was called after series was initialized.
- `LineSeries` legend marker wasn't working properly if legend was using different `Root` element.
- Better disposing of `<canvas>` elements to work around iOS Safari GC bug.


## [5.1.1] - 2022-01-31

### Added
- New method `remove(key)` on Template's adapaters.
- Each chart-type package now exports its default theme as `DefaultTheme`. E.g. `am5xy.DefaultTheme`, `am5flow.DefaultTheme`, etc.
- TypeScript: Settings interfaces for all objects are now being exposed via bundled re-export files like `index.ts`, `xy.ts`, etc.
- New class `am5.Modal`.
- New `Container` setting: `reverseChildren`. If set to `true`, will start rendering from the last child, effectively flipping the order in how children of the cotainer are laid out. Useful for [right-to-left setups](
https://www.amcharts.com/docs/v5/concepts/locales/right-to-left-support/).

### Changed
- Charts on iOS devices will now automatically use lesser resolution to work around canvas memory restriction introduced in iOS 15 Safari.
- Charts will now use less built-in layers, and thus less `<canvas>` elements by default, reducing memory consumption.
- All low/high-related settings and fields moved from `CandlestickSeries` to `XYSeries`. Sometimes it could be useful to have low/high on other series even if they are not shown visually.

### Fixed
- `XYCursor` was not being hidden when its `positionX` or `positionY` was changed to `undefined` and `alwaysShow` was set to `false`.
- Auto-wrapped right-aligned labels were being rendered in wrong position.
- Auto-wrapped labels were not being trimmed for whitespace on each line.
- `dropFromPrevious` and `riseFromPrevious` states on `ColumnSeries` were not working properly on a column after a gap in data in case previous data item was outside of selection.
- Emoji characters were not being displayed on circular labels.


## [5.1.0] - 2022-01-20

### Added
- New `Root` setting: `timezone`. E.g. `"America/Vancouver"`, `"Australia/Sydney"`, `"UTC"`.
- New export CSV option: `addBOM` (default: `true`). Indicates whether to add BOM characters at start of CSV output so that data viewer (e.g. Excel) knows we're exporting UTF-8 data.
- New methods for `Adapters`: `remove(key)`, `disable(key)`, and `enable(key)`.
- `GaplessDateAxis` added. It's a version of `DateAxis` that removes data-less intervals from its scale. `CategoryAxis` is being deprecated in favor of `GaplessDateAxis`. [More info](https://www.amcharts.com/docs/v5/charts/xy-chart/axes/gapless-date-axis/).
- Timezone support added. [More info](https://www.amcharts.com/docs/v5/getting-started/root-element/#Time_zone).
- New `Component` method: `markDirtyValues()`. Will re-evaluate elements of the component that are data-reliant, such as axis labels.

### Fixed
- Clearing axis ranges from Axis and Series was not working properly.
- Slice with negative arc was ignoring `cornerRadius` property.
- `groupDataDisabled` on `XYSeries` was not working if set to `true`.
- Axis header was not updating its position if axes were stacked and size of an axis was updated.
- Disposing of charts with a lot of elements was quite slow.
- Series stacks with all-zero values could cause all stacks to disappear on zoom.


## [5.0.21] - 2022-01-11

### Added
- New `Sprite` setting: `forceInactive`. If set to `true`, it will override `interactive` setting as well as ignore any interaction events set on the element.
- `cursorhidden` event added to `XYCursor`. Dispatched when user rolls-out of the chart plot area and cursor is hidden.
- New `Component` method: `markDirtyValues()`. Forces a repaint of the element which relies on data.

### Changed
- Value (4th parameter of the Heat rule's `customFunction`) will now receive actual value of the target data item, not interpolated calculated setting value.

### Fixed
- Fixing bug when not passing the duration to the `animate` method ([Issue 181](https://github.com/amcharts/amcharts5/issues/181)).
- Horizontal and vertical layouts with `width`/`height` set in percents plus `minWidth`/`minHeight`/`maxWidth`/`maxHeight` set were arranging items incorrectly.
- Very small slices with `cornrerRadius > 0` were being drawn as a full circle.
- `SliceGrouper` with was not zooming out properly if there was no legend in chart.
- changing `groupData` from `false` to `true` on DateAxis was not working when doing so after the chart was built.


## [5.0.20] - 2021-12-30

### Fixed
- `SliceGrouper` with `clickBehavior = "zoom"` was not zooming out properly.
- `GridLayout` could leave empty gaps if some of the items in it were hidden.
- dragging sprites within rotated containers was not working properly.
- Null value was breaking stacking of columns in some cases.
- Fixing tooltips being broken inside of shadow DOM. ([Issue 166](https://github.com/amcharts/amcharts5/issues/166))


## [5.0.19] - 2021-12-27

### Added
- `groupDataDisabled` setting added to XYSeries. If set to `false` will exclude series from data grouping mechanism, even if it is enabled on related `DateSeries`.
- New plugin `SliceGrouper`. Can be used to automatically group small slices on percent charts like Pie, Funnel, etc. [More info](https://www.amcharts.com/docs/v5/charts/percent-charts/grouping-slices/).

### Fixed
- If data was added to percent series after initial data was already processed, the bew slices would get colors from the start of the color set.
- Multiple square bracket and apostrophe escaping was not working properly.
- A JS error could occur when changing `XYSeries` data with less data items then there were before.
- `PieSeries` were not arranging its labels properly in some cases.
- `XYCursor` taps were not working properly after chart zoom on touch devices.


## [5.0.18] - 2021-12-19

### Changed
- When auto-wrapping labels, text will no longer break on dots to prevent fractional numbers from wrapping.
- Scrollable `Container`'s scrollbar will auto-hide if contents fit in it without scrolling.

### Fixed
- Disabling click-toggling of legend, was disabling hover events, too.
- `ResponsiveTheme`'s custom rules were not working properly.
- `Exporting` was not applying proper background color to exported images.
- `CategoryDateAxis` grid and labels placing algorithm improved.
- Sometimes bullets of XYChart were not being properly clipped by the bounds of the plot area.
- Memory leak related to: https://bugs.chromium.org/p/chromium/issues/detail?id=1279394 was fixed.


## [5.0.17] - 2021-12-15

### Fixed
- `WordCloud` was not coloring words even if colors ColorSet was set or data with colors was used.
- `WordCloud` was not showing anything if all words had the same weight.
- Adding `type` and `main` fields to `package.json`.
- Fixed scrollbar issue with non-animated theme where clicking on a background of a scrollbar would not move to target position.


## [5.0.16] - 2021-12-10

### Added
- `tooltipPositionX` and `tooltipPositionY` added to `XYSeries` (possible values: `"value"`, `"open"`, `"low"`, and `"high"`). Indicates which data item value tooltip should be anchored to.
- New settings added to `Exporting` for formatting durations: `durationFields`, `durationFormat`, and `durationUnit`.
- `showTooltipOn` (default: `"hover"`) added to `Sprite`. Another option is `"always"` which will show tooltip without any interaction with the element. [More info](https://www.amcharts.com/docs/v5/concepts/common-elements/tooltips/#Sticky_tooltips).

### Changed
- `Hierarchy` will now set bottom-level node's `cursorOverStyle: "default"` via theme, instead of hardocding it, so that it can be overridden via node templates.

### Fixed
- Stacked `XYSeries` with missing values and `valueYShow` set to `"valueYTotalPercent"` or `valueXShow` set to `"valueXTotalPercent"` were not showing columns/lines.
- Changing legend position from bottom/top to right/left was not arranging elements properly.
- If `Slice` of a `PieSeries` had a `templateField` set, legend marker was not using all the settings of that slice properly.
- Bullets were causing performance issues when data grouping was turned on.
- `Label` underline was not inheriting label's color properly.
- `Label` underline was not beign placed properly on center/right-aligned labels.


## [5.0.15] - 2021-12-07

### Added
- Experimental support for underlined text added. Can be enabled via `Label` setting `fontDecoration: "underline"`, or via in-line style block (`[underline]`).
- Three new accessibility settings added: `ariaControls`, `ariaValueMin`, and `ariaValueMax`.

### Changed
- Focus elements used for accessibility are now enclosed in a container with `role="application"` which helps avoid "scan mode" in some screen readers.
- Tapping outside chart will now hide `XYCursor`.

### Fixed
- Sometimes `XYCursor` would stay on pointer moved out of chart area quickly.
- Fixed memory leak.
- Arabic text (and possibly other RTL languages) was not being displayed right on circular labels, even with `direction = "rtl"` set.
- Arabic text (`direction = "rtl"`) was being misplaced in tooltips.
- New line was resetting current in-line text style.


## [5.0.14] - 2021-12-01

### Changed
- When setting `markerState` on `Annotator` it will now automatically render annotations without the need to open annotation mode.

### Fixed
- Updating data dynamically on series in all-`ValueAxis` setups.
- Rmoving axis range was not working properly.
- Closing annotation mode would not make chart regain its interactivity.


## [5.0.13] - 2021-11-25

### Added
- `clickTarget` (possible vales: `"itemContainer"` (default), `"marker"`, and `"none"`) added to `Legend`. Use `clickTarget: "none"` to disable toggling of legend items.

### Changed
- Setting `wheelX`/`wheelY` on `XYChart` or `MapChart` no longer marks their plot areas as `wheelable`.

### Fixed
- In some cases using `oversizedBehavior = "wrap"` on labels in super small spaces the chart would hang.
- Updating data on a `ForcedDirectedTree` may cause JS errors.
- Hovering legend item of a hidden slice no longer tries to show the tooltip for it.
- Drill-down maps were displaying country in a wrong position after drill-down.


## [5.0.12] - 2021-11-24

### Added
- `latitudeField` and `longitudeField` added to `MapPointSeries` for an easier way to add data.

### Changed
- Tooltip arrangement algorithm with many XY series was improved.

### Fixed
- Axis fill rule of `DateAxis` sometimes skipped an interval or was drawn two fills in a row. Also, with months as interval between grids, the end of the fill was not at exact position where it should have been.
- When setting new data for a series, if new data has less items than series had before, a JS error could occur.


## [5.0.11] - 2021-11-23

### Added
- New `fps` property on `Root` which defines the maximum FPS that it will run at. Set it 30 or lower if performance is an issue.
- `"range"` theme tag is now added to all axis range elements (axisFill, grid, tick and label) so you could target specific theme rules.
- `"range"` and `"series"` theme tag is now added to all series axis range elements (axisFill, grid, tick and label) so you could target specific theme rules.

### Changed
- A `axisFill` of an axis range will not be shown unless its `visible: true` setting is set.

### Fixed
- Adapter for `text` of a `Label` was not kicking in when data item of its `Tooltip` (or other parent of a Label) was changed.
- Legend marker/label was not returning to a default state when clicked on a disabled item in some cases when Animated theme was not used.
- Axis range fill tooltip was being shown in a wrong position.


## [5.0.10] - 2021-11-22

### Fixed
- `LineSeries`' strokes in an axis range were using wrong template, which could result incorrect colors or other settings (since 5.0.9).
- When data was updated on a live chart and the chart was not fully zoomed-out, some unnecessary Y axis animation used to happen after data update.


## [5.0.9] - 2021-11-22

### Changed
- `maxTooltipDistance` in `XYCursor` now accepts `-1` value, which means that only single tooltip will be shown, even if multiple data items share the same value.

### Fixed
- `GraticuleSeries` was broken.


## [5.0.8] - 2021-11-21

### Changed
- Trying to create a `Root` in a container that already contains a chart will result in a hard error now.
- All `XYSeries` now use both main template and axis range template (the latter has a priority) when decorating columns/lines/etc for the sections covered by axis range.

### Fixed
- Axis fills were not working properly.
- Since 5.0.6: Map was zoomed to incorrect position in some specific cases when `goHome()` method was called.


## [5.0.7] - 2021-11-19

### Added
- New setting `pan` (default: `"none"`) added to `AxisRendererX` and `AxisRendererY`. If set to `"zoom"` will enable zoom of axis scale by dragging in axis label area.

### Changed
- Heat rules will not longer apply setting value if target data item does not have any numeric value.
- Hovering legend item will now simulate hover on related item on some charts (e.g. `PieSeries`, `Hierarchy`, `Venn`).

###
- `HeatLegend` was acting out when its `showValue()` method was called with non-numeric parameter.
- If series was pre-hidden before chart init, its status was not being correctly reflected in related legend item.
- Locales in script version were not working properly.


## [5.0.6] - 2021-11-18

### Added
- Accessibility: new setting on `Sprite`: `focusableGroup`. If set, TAB key will iterate through first elements of each focusable group, allowing user to select within group using arrow keys. [More info](https://www.amcharts.com/docs/v5/concepts/accessibility/#Grouping_focusable_elements).
- New `Root` setting: `autoResize` (default: `true`). If set to `false`, the chart will not automtically resize itself when width/height of its container change. Use `resize()` method to resize manually.
- New `Root` method: `resize()`. Resizes chart to fit container dimensions, if automatic resizing is disabled (`root.autoResize = false`).
- Global `am5.p0` shortcut function added which returns `Percent(0)`.
- All element will now have a read-only property `root` which holds their `Root` object.
- New `Sprite` events: `rightclick` and `middleclick`. Please note that adding `rightclick` event will not disable possible contextual menu on right-mouse click.
- New `XYCursor` setting: `snapToSeriesBy` (default: `"xy"`). Defines in which direction to look when searching for the nearest data item to snap to. Possible values: `"xy"` (default), `"x"`, and `"y"`.

### Changed
- If set `wheel` event will now fire even if `wheelable = false`. This allows capturing wheel events on elements without interfering with scroll of the document.

### Fixed
- `oversizedBehavior` on `Label` (still) was not handling `maxWidth` and `maxHeight` values properly (since `5.0.2`).
- Dynamically updating `geoJSON` on a `MapPolygonSeries` was not working properly in some cases.


## [5.0.5] - 2021-11-15

### Added
- New root element method: `moveDOM()` (accepts element id or reference as a parameter). Can be used to move whole chart to some other container within DOM.

### Fixed
- `ExportingMenu` was interfering with functionality of form elements on the same page (e.g. select).
- Fixed issues with text kerning with styling blocks mid-word.
- Animating values of `width`/`height` settings using percent values was not working properly.


## [5.0.4] - 2021-11-12

### Added
- `panstarted`, `panended`, and `wheelended` events added to `XYChart`.

### Fixed
- Fixed `RadarChart` issues when it was being created in hidden container.
- `XYCursor` and `snapToSeries` problems fixed: was not working with `ColumnSeries`, and was not working properly with stacked axes.
- Adding/changing data on a `DateAxis` with `groupData = true` was not working properly.
- If non-rounded dates were used in data, `XYCursor`'s tooltips were flickering while moving cursor over plot area.


## [5.0.3] - 2021-11-09

### Fixed
- Incorrect sizing of a label in a central `Sunburst` node.


## [5.0.2] - 2021-11-09

### Added
- `radius()` and `baseRadius()` methods added to `RadialLabel`. Return `radius`/`baseRadius` value in pixels, calculated based on all the other settings.
- Global function `am5.ready()` added. Accepts a function as a parameter, which is executed when DOM is ready.

### Changed
- `baseRadius` of `RadialLabel` can now accept Percent values. Previously this property was set internally, now user can set it to a number or percent value.

### Fixed
- Stacking line series with missing data on some series was incorrect.
- `oversizedBehavior` on `Label` was not handling `maxWidth` and `maxHeight` values properly.


## [5.0.1] - 2021-11-05

### Fixed
- `XYChart` with panning enabled an no Animated theme was flickering while panning.
- JS error could occur sometimes if data was updated while cursor was moving over the chart.


## [5.0.0] - 2021-11-02

### Changed
- First public release.


## [5.0.0-beta.44] - 2021-11-02 (release candidate)

### Added
- `Triangle` class added.
- `labelText` setting added to `Tooltip`. If set the text will automatically be applied to tooltip's label.


## [5.0.0-beta.43] - 2021-11-02

### Fixed
- Image resolution could get choppy when resized (since previous version).


## [5.0.0-beta.42] - 2021-11-01

### Added
- If a `Bullet` has `dynamic: true` set, its sprite size will be marked as dirty each time the bullet updates its position.
- Axis name added to `AxisLabel` when created so it could be targeted by axis type in theme rules.

### Changed
- Upgraded to `marker.js` 2.16.2.
- `Annotator` new setting: `markerState`. You can use it to pre-set annotations, or grab annotation data at any time.
- Default text of an `AxisLabel` for `CategoryAxis` set to `"{category}"`.

### Fixed
- `Picture` was not working properly in containers in a non-default layer.
- `locationX` or `locationY` was being ignored on `RadarLineSeries` in some specific cases.
- `Tooltip` as not coloring its text properly with "Dark" theme enabled.


## [5.0.0-beta.41] - 2021-10-31

### Added
- `dRadius` and `dInnerRadius` settings added to `Slice` (default: `0`). Allows tweaking `radius`/`innerRadius` values in charts where these settings are set by the chart (`PieSeries`, circular/radial axis fills, etc.).
- `adjustBulletPosition` added to `BaseColumnSeries` (default: `true`). If set to `false`, bullets will be positioned relatively to whole width/height of the column, rather then the portion that is currently visible.

### Fixed
- `RadarChart` with `RadarLineSeries` could result a JS error when zoomed.


## [5.0.0-beta.40] - 2021-10-30

### Fixed
- `Label` setting `oversizedBehavior` was not working properly when heigh/with was 0.
- `XYSeries` was not calculating `maxWidth`/`maxHeight` properly on data items with negative values.
- Data grouping was not being applied when data was being updated after chart init.


## [5.0.0-beta.39] - 2021-10-29

### Changed
- All `MapChart`-related zoom methods will now return `Animation` object.


## [5.0.0-beta.38] - 2021-10-28

### Added
- `"depthX"` (`depth0`, `depth1`, etc.) tags added to Hierarchy Nodes. This allows targeting node items via theme rules by the level.

### Changed
- A function that returns a Bullet can choose to return nothing, effectively ommitting bullet for the data item.
- `Picture` elements will no inherit interactivity from its parents. If image needs to be interactive it needs to be set so directly via `interactive` setting.
- `Picture` will now use source file's dimensions if neither `width` and `height` is set, and will also maintain aspect ratio if just one from `width` or `height` is set.

### Fixed
- Better color generation and step management in `ColorSet`.


## [5.0.0-beta.37] - 2021-10-26

### Added
- Dataviz, Kelly, Moonrise, Frozen, Material and Spirited themes added.
- `seriesTooltipTarget` setting added to `XYSeries` (possible values: `"series"` (default) and `"bullet"`). If set to `"bullet"`, first bullet of a data item will be used for as a tooltip target, making it inherit bullet's color rather than series.

### Changed
- `Scrollbar` grip buttons will now have `exportable: false` set by default, so that they are not exported to chart snapshots.
- `WordCloud` words are now sorted by value if data was set using `series.data`.

### Fixed
- First label of the `WordCloud` could overlap with other words afer the data update.
- `ColorSet` was ignoring values set in a theme.
- Bullets with `Rectangle` or `RoundedRectangle` as a `sprite` were not being shown on an `XYSeries`.
- `MapChart` was overriding width/height variables to 100%.


## [5.0.0-beta.36] - 2021-10-25

### Added
- New chart type: Venn. [More info](https://www.amcharts.com/docs/v5/charts/venn/).
- New chart type: WordCloud. [More info](https://www.amcharts.com/docs/v5/charts/word-cloud/).

### Changed
- `XYSeries` will now automatically set the first bullet of a data item as the series' `tooltipTarget`. This will make the series tooltip background to change color to
the bullet's fill.

### Fixed
- Code optimizations to reduce size of core package by 10%.
- If data was being set for a `CategoryAxis` not instantly but after some time, the chart was not rendered properly.
- `svgPath` with `A` or `a` commands was not being rendered properly.


## [5.0.0-beta.35] - 2021-10-15

### Added
- New axis type: `DurationAxis`. [More info](https://www.amcharts.com/docs/v5/charts/xy-chart/axes/duration-axis/).
- New formatter type: `DurationFormatter`. [More info](https://www.amcharts.com/docs/v5/concepts/formatters/formatting-durations/).
- New `Root` element property: `durationFormatter`. Holds a global instance of `DurationFormatter` which is used by `DurationAxis`.
- `Annotator` tool added to `Exporting` plugin. [More info](https://www.amcharts.com/docs/v5/concepts/exporting/annotator/).

### Fixed
- Circular labels with `inside = true` where not properly handling line-breaks.


## [5.0.0-beta.34] - 2021-10-13

### Added
- It is now possible to pass a custom draw methods for classes like `Rectangle`, `RoundedRectangle`, `Candlestick`, etc. This allows implementing completely custom look for those elements.

### Changed
- Bullets on a `ColumnSeries` are now positioned vertically relative to visible part of the column, not the whole column.


## [5.0.0-beta.33] - 2021-10-12

### Fixed
- In-line data placeholder formatting functions were not being applied when referring directly to keys in data.
- If settings on a `DataProcessor` were set after it was created, they were being ignored when parsing data.
- In some cases tooltips were losing their background/outline unless Animated theme was enabled.
- In some cases tooltips for a hidden series were still showing.


## [5.0.0-beta.32] - 2021-10-08

### Changed
- `Exporting` plugin now imports minified version of `xlsx` library for XSLX data exports.
- Axis tooltips have now `animationDuration: 200` set automatically by Animated theme, so there's no need to set it in code anymore.

### Fixed
- Charts with `CategoryAxis` + `DateAxis` were zooming incorrectly in some cases.


## [5.0.0-beta.31] - 2021-10-07

### Changed
- Axis will automatically add relative `themeTags` (e.g. `"axis"`, `"y"`, etc.) to a `Tooltip` when it is added. Setting `themeTags` manually is not required anymore.

### Fixed
- An adapter for a setting was not being invoked if source value was `undefined`.
- Tooltips on vertically or horizontally stacked axes were being shown in wrong positions.
- Tooltip background displayed some artifact in some rare cases.


## [5.0.0-beta.30] - 2021-10-05

### Added
- `shadow*` settings are now available on `Label` as well.
- `arrangeTooltips` (default: `true`) setting added to `XYChart`. If set to `false` will disable tooltip overlap check algo.

### Fixed
- Fixed type errors when importing maps (especially in Angular).
- Fixed `templateField` to override `template`.


## [5.0.0-beta.29] - 2021-10-01

### Added
- Wherever date or number format can be set (`DateFormatter`, `NumberFormatter`, `DateAxis`, `ValueAxis`, `Exporting`) it can now be set as `Intl.DateTimeFormatOptions` (for date format) or `Intl.NumberFormatOptions` (for number format) object in additional to string-based format. [More info](https://www.amcharts.com/docs/v5/tutorials/formatting-date-time-and-numbers-using-intl-object/).
- New list type `ListAutoDispose` added.

### Changed
- `XYCursor` will now ignore mouse movement if chart is obstructed by other element, unless zoomin/panning.
- `series`, `xAxes`, and `yAxes` on an `XYChart` are now `ListAutoDispose`, which means that removing items from those lists will automatically dispose them. Set `autoDispose = false` on those lists if you are planning on removing and reusing items.

### Fixed
- `Sunburst` nodes were shown on drill-down when they were not supposed to in some cases.
- `Hierarchy` node elements were ignoring `templateField`.
- It was impossible to move `XYChart` scrollbars to some other container.
- Fixed memory leaking when scrolling `LineSeries`, and when disposing series or other items.
- `XYCursor` was not firing `selectended` event if `behavior` was set to `"selectX"`, `"selectY"`, or `"selectXY"`.
- `XYCursor` was hiding selection when when behavior was set to `"selectX"`, `"selectY"`, or `"selectXY"`.
- `SerialChart.series.clear()` was not working properly.


## [5.0.0-beta.28] - 2021-09-28

### Added
- Two new settings in `Pattern`: `strokeDasharray` and `strokeDashoffset`.
- `Graphics` and `Picture` can now have shadows with additional settings: `shadowColor`, `shadowBlur`, `shadowOffsetX`, `shadowOffsetY`, and `shadowOpacity`. [More info](https://www.amcharts.com/docs/v5/concepts/colors-gradients-and-patterns/shadows/).
- New setting in `ListTemplate`: `autoDispose` (default: `true`). If set to `true` will dispose items removed from the list.

### Changed
- `width` and `height` settings in `Pattern` are now optional.

### Fixed
- Fixed the priority of `template` and `templateField`.
- It's now possible for the user to override the `template` of the `ListTemplate`.
- Fixed a memory leak where series' entities were not properly disposed.
- `DataProcessor` was not parsing dates as `Date` objects unless `dateFormat` was also set (which is completely not needed).
- `setRaw` and `setPrivateRaw` no longer trigger events if the value didn't change.


## [5.0.0-beta.27] - 2021-09-27

### Added
- Root element now has publicly-accessible property: `dom`. Holds a reference to chart container (div).

### Fixed
- Gradient/pattern fills were not working on some elements (since 5.0.0-beta.18).


## [5.0.0-beta.26] - 2021-09-24

### Fixed
- `MapLineSeries` with line geometry inside GeoJSON was not working properly.


## [5.0.0-beta.25] - 2021-09-24

### Added
- New `Entity` setting: `userData`. Use it to store any kind of proprietary data with any object in amCharts 5 that extends `Entity`.

### Changed
- Series axis range will now have `visible: false` set for all axis elements (grid, fill, label, tick) by deafult. If you need to enable them, set `visible: true` on a respective range element. [More info](https://www.amcharts.com/docs/v5/charts/xy-chart/axes/axis-ranges/#Elements_on_a_series_range).

### Fixed
- Improperly closed in-line text style blocks could cause label palcement issues.
- Using `\n\n` in text was not resulting in empty line.
- Horizontal `Sankey` bullets were not using their `locationX` as it should.


## [5.0.0-beta.24] - 2021-09-23

### Added
- `autoRotate` and `autoRotateAngle` settings added to `Bullet`. Works on `Flow` and `MapPointSeries` (when `MapPoint` is attached to a `MapLine`).

### Changed
- `Sankey` bullets will now check `locationY` if series is vertical, and `locationX` of its a horizontal series. It was using `positionY` for all orientations previously.

### Fixed
- In some cases labels with `oversizedBehavior: "fit"` were not being resized when available space was changed.
- `autoRotate`


## [5.0.0-beta.23] - 2021-09-23

### Fixed
- Scrollbar was doing some unneeded animations when grip was released while axis was still animating.
- Double-clicking on scrollbar thumb did not always result full zoomout.
- Clicking on Scrollbar background did not always result in animating to the clicked position.
- `stroke` & `fill` set on `ColumnSeries`' `columns.template` was being overriden by series `stroke` and `fill`.
- Not all settings of `columns.template` were copied to `ColumnSeries`' legend marker.


## [5.0.0-beta.22] - 2021-09-22

### Added
- `PercentSeries`, `FlowNodes`, and `Hierarchy` now have `fillField` setting. It can be used to specify slice/node fill color via data. If not set, colors will be assigned automatically from series' `colors` (`ColorSet`).

### Changed
- The way values of nodes in `Hierarchy` is counted updated to be consistent. There are two options now: a) set values on lowest nodes (no children) so that each node's value is a sum of all its descendants; b) set values for **each** node. Using any other approach might produce unpredictangle results.
- `colors` of the `PercentSeries`, `FlowNodes`, and `Hierarchy` will be reset every time new data is set.

### Fixed
- Charts now will update their resolution when zooming. That fixes blurriness when page is zoomed in.
- In some cases, axis' or series' tooltip was showing correct value but was not positioned in the right position.
- If a `templateField` was set on `FlowNodes`' `rectangles`, the `fill` of the rectangle set in the field was ignored.


## [5.0.0-beta.21] - 2021-09-21

### Fixed
- Compared `XYSeries` with `valueYShow: "valueYChangeSelectionPercent"` were redrawn no taking current zoom into account when mouse cursor left plot area when panning chart.


## [5.0.0-beta.20] - 2021-09-21

### Added
- `toFront()` and `toBack()` methods added to `Sprite`.
- `"above"` setting added to `AxisDataItem`. Allows putting `AxisRange` grid and fill elements above the series.
- New setting `ignoreFormatting` for `Label` added. If set to `true`, it will ignore square-bracketed style blocks and will display text as it is.

### Fixed
- Elements in chart will not generate hover events if they are obstructed by some other DOM element anymore.
- `XYSeries` with a vertical axis range was fully visible, even the part covered by an axis range.
- Axis bullets were not being hidden when axis data item was hidden.
- Labels in `BreadcrumbBar` were sometimes misaligned in Safari browser.
- Legend item of an initially-hidden series/slices/columns was being shown as enabled.


## [5.0.0-beta.19] - 2021-09-18

### Fixed
- Removing an axis from `xAxes` or `yAxes` was not working properly in some cases.
- If a `templateField` was set on some child of a bullet's `sprite`, it was being ignored.


## [5.0.0-beta.18] - 2021-09-17

### Added
- `areLinked()` method added to `LinkedHierarchy`.
- `unlinkDataItems()` method added to `LinkedHierarchy`.
- Global function `am5.disposeAllRootElements()` added. Disposes all charts.
- `am5.registry.rootElements` added which holds an array with instances of all active `Root` elements.
- `seriesGraphics` property added to `PictorialStackedSeries`. It's a `Graphics` which shows `svgPath` shape under all slices. Useful when `startLocation`/`endLocation` is used to make slices not occupy whole shape area.

### Changed
- `maxPanOut` of `MapChart` is temporarily disabled until we figure out proper behavior for it.

### Fixed
- Linking nodes with `linkDataItems` of `LinkedHierarchy` was not working if called after the data was set.
- `Micro` theme was not removing padding from charts.
- Adding in `@types/geojson` as a dependency.
- Map could jump to unpredictable position after the chart's container size changed and user zoomed or panned the map.
- In some cases `Label` with `oversizedBehavior = "fit"` could be incorrectly positioned.
- Removing series and axes from a serial chart was not working properly.


## [5.0.0-beta.17] - 2021-09-15

### Changed
- Default for `Treemap` setting `layoutAlgorithm` changed to `"squarify"`.
- Providing value in Hierarchy node's data will override sum of its children (except for `Pack`).

### Fixed
- `ForceDirected` nodes were linked to invisible top node even though `topDepth` was set to `1` meaning top node should not be visible. This was causing issues with the layout of such nodes.


## [5.0.0-beta.16] - 2021-09-14

### Fixed
- Fills for axis ranges could go out of plot area bounds.
- Tooltip of Y axis could be displayed out of bounds in some cases.


## [5.0.0-beta.15] - 2021-09-14

### Added
- `dynamic` setting added to `Bullet`, for the bullets that need their `sprite` element redrawn when related series changes in any way.
- `ClockHand` now supports negative radius value (distance from the target axis outer radius in pixels).
- `syncWithAxis` added to `ValueAxis`. If enabled, will sync grid between the axes.

### Changed
- If legend items container toggle key is set to `"none"`, clicking on the legend item will not do anything now.
- In `MapLineSeries`, if a data item had `pointsToConnect` set, map line now first looks at the point's longitude/latitude setting and then at the geometry.

### Fixed
- Play button was not chaning to default state instantly.
- Change of `curveFactory` of `LineSeries` was not forcing redraw of the series.
- `StepLineSeries` was not drawn properly when both X and Y axes were `ValueAxis`.
- `StepLineSeries` was not showing tooltip when it was set as a `snapToSeries` on chart Cursor.
- Theme rules now have the correct priority no matter where they are defined.


## [5.0.0-beta.14] - 2021-09-10

### Fixed
- `Scrollbar` grips' theme tags modified so that a correct color would be used.
- `XYCursor` with multiple entried in `snapToSeries` was causing multiple tooltips to show at all times.


## [5.0.0-beta.13] - 2021-09-09

### Added
- `Star` now supports inner radius set in percent.

### Fixed
- Tooltips for radar series were not show with `RadarCursor`.
- In some cases, Scrollbars were not being updated when zoomed-in with cursor.
- Clicking on scrollbar's background resulted in scrollbar animation, but the scrollbar did not update its axis.
- Dynamically changing `geoJSON` on a `MapSeries` was not working


## [5.0.0-beta.12] - 2021-09-08

### Added
- `AxisRendererCircular` now supports negative radius values.

### Changed
- When a template state is changed, it now automatically updates related `Entity`'s state as well.

### Fixed
- `LineSeries` was not working properly with `templateField` set on `strokes` or `fills`.
- `LineSeries` could stop drawing line while zooming if there were gaps in the data.


## [5.0.0-beta.11] - 2021-09-08

### Changed
- `fill` and `stroke` settings moved from `XYSeries` to `Series`, so that all series like `MapSeries` could be shown in Legend.
- Text of a tooltip text will now adaptively change color based on current background color.

### Fixed
- `"click"` event is no longer fired on right-click.
- Changing data dynamically on map-related series was not working properly.
- Switching projection on a zoomed-in/translated map was resulting in new map to be in a wrong position.


## [5.0.0-beta.10] - 2021-09-07

### Fixed
- A quick flash of chart position fixed (introduced in `5.0.0-beta.9`).
- MapChart.goHome() method fixed.


## [5.0.0-beta.9] - 2021-09-06

### Added
- `id` setting to all entities. If set, will also appear in `am5.registry.entitiesById`.
- `show()` and `hide()` methods of `DataItem` now accept duration param.

### Fixed
- Stacking of horizontal bars was not working properly.
- Children of a `Container` were not being disposed properly together with the container itself.
- Tooltip for a series close to the top/bottom of a plot area sometimes was not being displayed.
- `PieSeries` was overriding label `textType` setting.
- `XYChart` and `MapChart` were taking over mouse wheel action even when `wheelY` and `wheelX` were set to `"none"`.
- `XYCursor` was not showing series tooltips if Y axis was not a `ValueAxis`.
- `XYCursor` was showing previous data point tooltip if currently hovered position did not have data item or value was null.
- Percent chart could go to SO if there were no values in data.
- Changing `layer` value dynamically was not working properly.


## [5.0.0-beta.8] - 2021-09-02

### Added
- `deltaPosition` added to data item of a `CategoryAxis`. Can be used for sorting series columns without modifying data order.
- `resetExtremes()` method added to `XYSeries`. Resets series extremes to `undefined`. Can be used when values of a series are changed from outside.


## [5.0.0-beta.7] - 2021-08-31

### Added
- New `themeTagsSelf` setting for Entity which is the same as `themeTags` except it doesn't apply to the children.
- `clipBack` setting added to `MapLineSeries`.

### Changed
- Tooltips and Cursor are now `exportable: false` by default (meaning they won't be included in exported images).

### Fixed
- Sometimes plot container of an `XYChart` was not registering pointerout event.
- Accessibility: Not-measured items (e.g. columns) were not being properly outlined when focused.
- Zoom out button only zoomed out axes but not scrollbars.
- If a zoom out button was over columns or other interactive element, it was not working.
- `goHome()` method of `MapChart` was not working properly.
- Fixed fill style for `Scrollbar` grips.


## [5.0.0-beta.6] - 2021-08-29

### Fixed
- Hiding chart container or setting its width/height to zero was resulting in error.
- State setting values set in theme rules/templates were not being applied.
- Improved arrangement of multiple tooltips on a `XYChart`.
- Improved alignment of Legend labels improved.
- Huge numbers in `layer` setting were resulting in severe degration of performance.


## [5.0.0-beta.5] - 2021-08-27

### Fixed
- Fixed `RadarCursor` issues.


## [5.0.0-beta.4] - 2021-08-27

### Fixed
- Initial bugfixes.


## [5.0.0-beta.3] - 2021-08-25

### Fixed
- Initial bugfixes.


## [5.0.0-beta.2] - 2021-08-16

### Fixed
- Initial bugfixes.


## [5.0.0-beta.1] - 2021-08-13

### Added
- Initial preview release
